default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCID38th IECON 2012: Montreal, QC, Canada
- 38th Annual Conference on IEEE Industrial Electronics Society, IECON 2012, Montreal, QC, Canada, October 25-28, 2012. IEEE 2012, ISBN 978-1-4673-2419-9
- Huai Wang
, Ke Ma, Frede Blaabjerg:
Design for reliability of power electronic systems. 33-44 - Euzeli C. dos Santos:
A bidirectional dc-ac converter. 50-56 - Yao Zhang, Hao Ma, Guoqiang Zhao, Jin Guo:
A current-sharing method based on networked control for three-phase parallel inverter. 57-61 - R. K. Singh, Santanu Mishra:
A digital feedback clamped synthetic ripple based hysteretic modulator for optimal battery charging. 62-67 - Shih-An Liang, Ching-Wen Huang, Po-Chang Lu:
A high power and multi-outputs of AC-DC power supply design to meet 80 plus gold and ErP requirements. 68-73 - Sérgio Augusto Oliveira da Silva, Rodrigo Augusto Modesto, Rodrigo Barriviera, Mauricio dos Santos Kaster:
A line-interactive UPS system operating with sinusoidal voltage and current references obtained from a self-tuning filter. 74-79 - Hui Zhao, Hongbo Li, Min Chen, Kai Zhang:
A modified single-phase h-bridge PWM rectifier with power decoupling. 80-85 - Duk-You Kim, Chong-Eun Kim, Gun-Woo Moon:
A new control method in Phase-Shifted Full-bridge converter for reduced power consumption under light load conditions. 86-91 - Mehdi Narimani, Gerry Moschopoulos:
A new interleaved three-phase single-stage PFC AC-DC converter. 92-97 - Ricardo L. A. Ribeiro, Franklin do Nascimento, Christian Azevedo, Thiago de Oliveira Alves Rocha, Rodrigo Lopes Barreto:
A non-standard control strategy for grid-tied single phase systems with power quality compensation. 98-103 - Yung-Jen Chen, Dan Chen, Yu-Cheng Lin, Ching-Jan Chen, Chien-Hui Wang:
A novel constant on-time current-mode control scheme to achieve adaptive voltage positioning for DC power converters. 104-109 - Peng-yu Zhang, Yan Zhou, Xiaosheng Liu, JI-wei Pang, Zhen-feng Zhao:
A novel fast and deterministic substation communication network architecture based on AFDX. 110-115 - Wang Cong, Guopeng Zhang, Cheng Hong, Yaopu Li:
A novel modulation strategy based on two dimensional modulation for balancing DC-link capacitor voltages of cascaded H-Bridges Rectifier. 116-122 - Eduardo E. Espinosa, José R. Espinoza, Felipe Villarroel, Javier A. Muñoz, Pedro E. Melin, Roberto O. Ramírez:
A novel modulation technique for asymmetric multi-cell inverters of 27-level without regeneration. 123-128 - Alla Koteswara Rao, C. P. V. Krishna Reddy, Prashant Jain, G. Balawanth Reddy, Siriki Eswara Rao, Bishnu Prasad Muni:
A novel neutral point balancing technique for SVPWM switched 3-level inverter for AC drives. 129-133 - Congwei Liu, Zhandong Sun, Ningzi Cheng, Yaohua Li:
A novel synchronous PWM method for three-phase AC/DC/AC converter without DC-link capacitor. 134-138 - Zheng Wei, Xiang Deng, Chunying Gong, Jiawei Chen, Fanghua Zhang:
A novel technique of low frequency input current ripple reduction in two-stage DC-AC inverter. 139-143 - Jin-Feng Nie, Xi Xiao, Zanxiang Nie, Peigen Tian, Ruoxing Ding:
A novel three-level changeover circuit of super-capacitor bank for energy storage systems. 144-149 - Liang Wang, Qirong Jiang, Lucheng Hong:
A novel three-phase software phase-locked loop based on frequency-locked loop and initial phase angle detection phase-locked loop. 150-155 - Ricardo L. A. Ribeiro, Jailton Moreira, Raphaell Souza, Christian Azevedo:
A robust control strategy for regulating dc-link voltage of active power filter without load current measurements. 156-161 - Hao Ma, Qinwei Liu, Jin Guo:
A sliding-mode control scheme for llc resonant DC/DC converter with fast transient response. 162-167 - Luís F. C. Monteiro, J. G. Pinto, João Luiz Afonso, Maria Dias Bellar:
A three-phase four-wire Unified Power Quality Conditioner without series transformers. 168-173 - Theodore Soong, Peter Lehn:
A transformerless high boost DC-DC converter for use in medium / high voltage applications. 174-179 - Xi Xiao, Jin-Feng Nie, Zanxiang Nie, Peigen Tian, Ruoxing Ding:
A universal two-level changeover circuit of super-capacitor bank for energy storage systems. 180-184 - In-Ho Cho, Gun-Woo Moon:
A zero-voltage and zero-current switching full bridge converter using an auxiliary circuit. 185-190 - Xu She, Alex Q. Huang, Xijun Ni, Rolando Burgos:
AC circulating currents suppression in modular multilevel converter. 191-196 - Zhong Chen, Miao Chen:
Active filter solutions with high reliability for more electric aircraft. 197-203 - Byoung-Hee Lee, Young Do Kim, Moon-Young Kim, In-Ho Cho, Gun-Woo Moon:
Active-clamp forward converter with asymmetric transformer turns for reducing transformer DC offset current. 204-209 - Sheng Liu, Xiaobo Wu, Fenjie Yuan, Menglian Zhao:
An adaptive on-time controlled boost LED driver with high dimming ratio. 210-214 - Jan Leuchter, Pavol Bauer, Ahmed F. Zobaa:
An efficiency investigation and experimental verification of EGS with VSCF. 215-221 - Ezana T. Mekonnen, Jason Katcha, Michael Parker:
An FPGA-based digital control development method for power electronics. 222-226 - Junjun Zhang, Hongfei Wu, Yan Xing, Yanbing Xia, Kai Sun:
An interleaved-series/parallel forward converter with wide input voltage range. 227-231 - Yun She:
An unified d-q transformation based balancing controller for cascaded multilevel converter. 232-237 - M. A. Moonem, Hariharan Krishnaswami:
Analysis of dual active bridge based power electronic transformer as a three-phase inverter. 238-243 - Tomokazu Mishima, Kouhei Akamatsu, Mutsuo Nakaoka:
Analysis, design and evaluations of a soft switching PWM DC-DC converter with phase shift-controlled ZCS active hybrid rectifier. 244-249 - Nisha Kondrath, Marian K. Kazimierczuk:
Audio-susceptibility of the inner-loop of peak current-mode controlled PWM DC-DC buck converter in CCM. 250-255 - Omar Fernando Ruíz-Martínez, Ilse Cervantes:
Averaged modeling of transformer-coupled interleaved boost converters. 256-261 - Antonio Leon-Masich, Hugo Valderrama-Blavi, Josep M. Bosque, Luis Martínez-Salamero, Jose Antonio Barrado Rodrigo, Freddy Flores-Bahamonde:
Battery-supplied transformerless ballast for DC high intensity discharge (HID) lamps. 262-268 - Huihui Song, Yanbin Qu, Xinyu Wang:
Bond graph and port-controlled hamiltonian model of doubly-fed wind power system. 269-273 - Petar J. Grbovic, Philippe Delarue, Philippe Le Moigne:
Boost diode rectifier for three-phase variable speed drives supplied from the single-phase mains: Analysis and design. 274-280 - Biao Zhao, Qiang Song, Wenhua Liu, Yandong Sun:
Characterization and application of next-generation SiC power devices for high-frequency isolated bidirectional DC-DC converter. 281-286 - Qinye Chen, Dehua Zhang, Yaojie Hou, Lixiang Jin:
Clamping voltage control strategy for the Actively Clamped Resonant DC-link inverter. 287-292 - Johan I. Guzman, Carlos R. Baier, José R. Espinoza, Pedro E. Melin, Javier A. Muñoz:
Comparison of CSI and VSI based modular rectifiers with magnetic AC coupling for large current and low voltage applications. 293-298 - Renan C. Viero, Fernando Bereta dos Reis, Fernando S. dos Reis:
Computational model of the dynamic behavior of the ZETA converter in discontinuous conduction mode. 299-303 - Sylvia Mendez, Abelardo Martinez, Carlos Eduardo Montano, Willian Millan, Estanislao Oyarbide, Francisco Jose Pérez-Cebolla:
Control of a 1 kW switched reluctance generator using triac. 304-309 - Yaser M. Roshan, Mehrdad Moallem:
Control of a boost converter for resistive input behavior in the continuous conduction mode. 310-315 - Liping Zheng, Dong Le:
Control of a three-phase four-wire inverter. 316-320 - Taciana Paula Enderle, Guilherme S. da Silva, Clécio Fischer, Rafael Concatto Beltrame, Luciano Schuch, Vinicius Foletto Montagner, Cassiano Rech:
D-STATCOM applied to single-phase distribution networks: Modeling and control. 321-326 - Peter Stumpf, Rafael K. Jardan, István Nagy:
DC components and subharmonics generated by naturally sampled PWM techniques. 327-332 - Patrick R. Palmer, Xin Yang, WeiWei He:
Dead-time minimisation using active voltage control gate drive for high-power IGBT converters. 333-338 - Xiaojian Zhong, Lei Hong, Xiao Chen, Guozhu Chen:
Design and implementation of compound current control strategy for improved LCL-based Shunt Active Power Filter. 339-344 - Christophe Winter, Christophe Auvigne, Yves Perriard:
Design of a resonant power inverter for a piezoelectric actuator. 345-349 - Bernardo Cougo, Thierry Meynard, Henri Schneider:
Double three-phase Dual Active Bridge converter for high frequency high current applications. 350-355 - Jorge Valero-Rodriguez, Emilio Bueno Peña, Pablo Ledesma Larrea, Hortensia Amaris Duarte, Ana Rodriguez:
Dynamic performance of a STATCOM under grid disturbances for two different linear controllers. 356-361 - Takayuki Nakamura, Yoshiaki Taguchi, Masamichi Ogasa:
Effective method of using electromagnetic coupling of air-core reactor. 362-367 - Thomas Andersen, Lina Huang, Michael A. E. Andersen, Ole C. Thomsen:
Efficiency of capacitively loaded converters. 368-373 - Emmanouil Dimopoulos, Ionut Trintis, Stig Munk-Nielsen:
Energy harvesting cycles of Dielectric ElectroActive Polymer Generators. 374-381 - Kumars Rouzbehi, Arash Miranian, Costantino Citro, Alvaro Luna, Pedro Rodríguez:
Enhanced average current-mode control for DC-DC converters based on an optimized fuzzy logic controller. 382-387 - Arman Hassanpoor, Staffan Norrga, Hans-Peter Nee, Lennart Angquist:
Evaluation of different carrier-based PWM methods for modular multilevel converters for HVDC application. 388-393 - Klaus Muehlbauer, Dieter Gerling:
Experimental verification of energy efficiency enhancement in power electronics at partial load. 394-397 - Eunice Ribeiro, António J. Marques Cardoso, Chiara Boccaletti:
Fault analysis of dual active bridge converters. 398-403 - Luís M. A. Caseiro, André M. S. Mendes, Adérito Neto Alcaso:
Fault diagnosis and tolerance in three-level Neutral-Point-Clamped rectifiers. 404-409 - Pedro Faria Lopes, André Mendes:
Fault tolerance in active power filters, based on multilevel NPC topology. 410-415 - Andrea Toscani, Paolo Cova, Fulvio Bertoluzza, Nicola Pini, Giovanni Franceschini:
Fault tolerant digital control of 2 MVA parallelable frequency converters for harbor applications. 416-421 - Jae-Eul Yeon, Min-Young Park, Kyu-Min Cho, Hee-Jun Kim:
Field stop shorted anode trench IGBT for induction heating appliances. 422-426 - Claudio Carretero, Oscar Lucía, Jesús Acero, José M. Burdio:
First harmonic equivalent impedance of coupled inductive loads for induction heating applications. 427-432 - Freddy Flores-Bahamonde, Hugo Valderrama-Blavi, Josep M. Bosque, Antonio Leon-Masich, Luis Martínez-Salamero:
Grid-connected boost inverter for small-wind urban integration: Analysis and design. 433-439 - Jan M. Schellekens, Jorge L. Duarte, Henk Huisman, Marcel A. M. Hendrix:
Harmonics in opposed current converters. 440-446 - Branislav Dobrucký, Michal Prazenica, Slavomir Kascak, J. Kassa:
HF link LCTLC resonant converter with LF AC output. 447-452 - Yefim Berkovich, Boris Axelrod:
High step-up DC-DC converter with coupled inductor and reduced switch-voltage stress. 453-458 - Gregory Arthur de Almeida Carlos, Euzeli Cipriano dos Santos, Cursino Brandão Jacobina:
Hybrid PWM strategy for voltage source inverters feeding three-phase open-end-winding equipment. 459-464 - Patrick R. Palmer, WeiWei He, Xueqiang Zhang, Jin Zhang, Mark Snook:
IGBT series connection under Active Voltage Control with temporary clamp. 465-470 - Nadia Smith, Roy McCann:
Implementation of a multiple input converter using fuzzy logic control for a stand-alone photovoltaic system. 471-476 - Djilali Hamza, Qiu Mei, Praveen K. Jain:
Implementation of an EMI active filter in grid-tied PV micro-inverter controller and stability verification. 477-482 - Abdoulkarim Bouabana, Constantinos Sourkounis, Malte Mallach:
Implementation of different layouts of a coreless planar transformer for a flyback converter. 483-487 - Pedro E. Melin, José R. Espinoza, Carlos R. Baier, Jaime Addin Rohten, Roberto O. Ramírez, Luis A. Morán:
Improved control scheme towards reduced DC link inductors in a Multi-Cell Topology based on Current Source Converters. 488-493 - Md. Ashfanoor Kabir, Amina Hasan Abedin, Md. Rubaiyat Tanvir Hossain, M. A. Choudhury, M. Nasir Uddin:
Input AC side switched active filtered high performance three phase cuk rectification with energy recovery snubber. 494-499 - Trung Hieu Trinh, Thanh Hai Phung, Jean-Christophe Crebier, Nicolas Rouger, Yves Lembeye:
Integrated low power low voltage isolated switch mode power supply. 500-505 - Bas J. D. Vermulst, C. G. E. Wijnands, Jorge L. Duarte:
Isolated high-efficiency DC/DC converter for photovoltaic applications. 506-511 - Hamidreza Keyhani, Hamid A. Toliyat, Maja Harfman Todorovic, Rixin Lai, Rajib Datta:
Isolated soft-switching HFAC-link 3-phase ACAC converter using a single-phase HF transformer. 512-517 - Jevgeni Shklovski, Kuno Janson, Ants Kallaste:
Load-resonant converter with changing resonant tank topology for welding applications. 518-524 - Jean-Claude Le Claire, Mohamed-Fouad Benkhoris:
Low THD voltage source involving two sliding mode controllers. 525-530 - Behzad Mahdavikhah, Mor Mordechai Peretz, Aleksandar Prodic:
Low-volume power supply for vehicular fuel injection systems. 531-536 - Gilbert Bergna, Jon Are Suul, Erik Berne, Philippe Egrot, Pierre Lefranc, Jean-Claude Vannier, Marta Molinas:
Mitigating DC-side power oscillations and negative sequence load currents in Modular Multilevel Converters under unbalanced faults- first approach using resonant PI. 537-542 - Yen-Fang Li, Ming-Fa Tsai, Chung-Shi Tseng, Yi-Fan Chiang:
Model reference adaptive control design for the buck-boost converter. 543-548 - Reza Sabzehgar, Mehrdad Moallem:
Modeling and control of a three-phase boost converter for irregular input sources. 549-554 - Maria C. Mira, Juan C. Hernandez, Gökhan Sen, Ole C. Thomsen, Michael A. E. Andersen:
Modeling and control of primary parallel isolated boost converter. 555-560 - Abdallah Darkawi, Thierry Martiré, Jean-Jacques Huselstein, François Forest, Petru V. Notingher:
Modeling and design of multi-cell buck converters using InterCell Transformers for HVDC cable diagnostic. 561-566 - Xiang Deng, Zheng Wei, Yi Fan, Chunying Gong, Xiaoli Meng:
MOdified One-Cycle-Controlled Three-Phase Power-Factor-Correction. 567-572 - Roberto O. Ramírez, José R. Espinoza, Pedro E. Melin, Felipe A. Villarroel, Eduardo E. Espinosa, Marco E. Rivera:
Multi-cell topology based on voltage-source converters with a reduced DC Capacitor by means of a predictive control scheme. 573-578 - Madhukar Waware, Pramod Agarwal:
Multilevel inverter based active power filter using space vector modulation. 579-584 - Ramkrishan Maheshwari, Stig Munk-Nielsen, Sergio Busquets-Monge:
Neutral-point voltage dynamic model of three-level NPC inverter for reactive load. 585-589 - Slim Hrigua, François Costa, Cyrille Gautier, Bertrand Revol:
New Method of EMI analysis in power electronics based on semiconductors transient models: Application to SiC MOSFET/Schottky diode. 590-595 - Thomas Andersen, Michael A. E. Andersen, Ole C. Thomsen, Martin P. Foster, David A. Stone:
Nonlinear effects in piezoelectric transformers explained by thermal-electric model based on a hypothesis of self-heating. 596-601 - Xianhui Qin, Bo Zhou, Hai-tao Huang, Mingming Shi, Xiaoyu Liu:
Novel modulation strategy and decoupling algorithm for two stage three phase four leg matrix converter. 602-608 - Yen-Shin Lai, Zih-Jie Su:
Novel on-line maximum duty point tracking technique to improving server power efficiency meeting 80plus Gold code. 609-614 - Sisira James, Nihal Kularatna, D. Alistair Steyn-Ross, Rainer Künnemeyer:
Numerical simulation of surge protection circuits and experimental verification using a lightning surge simulator. 615-620 - E. S. Sreeraj, Prejith E. K., Kishore Chatterjee:
One cycle controlled active harmonic filter. 621-626 - Javier Alexis Andrade-Romero, Victoria Herrera, Jesus Franklin Andrade Romero:
Open-Circuit fault detection analysis for indirect matrix converter in Microturbine generation systems. 627-631 - Jonas Mühlethaler, Hirofumi Uemura, Johann W. Kolar:
Optimal design of EMI filters for single-phase boost PFC circuits. 632-638 - Nady Rocha, Cursino Brandão Jacobina, Euzeli C. dos Santos, Rodolpho M. de B. Cavalcanti:
Parallel connection of two single-phase ac-dc-ac three-leg converter with interleaved technique. 639-644 - Shingo Kawano, Eiji Hiraki, Toshihiko Tanaka, Masayuki Okamoto:
Performance analysis for high-frequency link AC-AC contact-less power supply system in parking tower. 645-650 - Hadeed Ahmed Sher, Khaled E. Addoweesh, Yasin Khan, Syed Abdul Rahman Kashif:
Performance of inverter fed induction motor under open circuit DC link capacitor. 651-655 - Il-Oun Lee, Shin-Young Cho, Gun-Woo Moon:
Phase-shifted dual H-Bridge converter with a wide ZVS range and reduced output filter. 656-661 - Yu-Hao Su, Yuan-Ping Liu, Dejan Vasic, François Costa, Wen-Jong Wu, Chih-Kung Lee:
Power improvement of piezoelectric transformer based DC/DC converter. 662-667 - Abdullah M. Fahmy, Mostafa S. Hamad, Ahmed Kadry Abdelsalam, Ahmed A. Lotfy:
Power quality improvement in three-phase four-wire system using a shunt APF with predictive current control. 668-673 - Marco Rivera, Samir Kouro, José Rodríguez, Bin Wu, José R. Espinoza:
Predictive control of a current source converter operating with low switching frequency. 674-679 - Peter Kamby, Arnold Knott, Michael A. E. Andersen:
Printed circuit board integrated toroidal radio frequency inductors. 680-684 - Fumiya Hattori, Masayoshi Yamamoto:
Proposal and analysis of gate drive circuit suitable for GaN-FET. 685-690 - Qing-Chang Zhong, Zhenyu Ma, Phi-Long Nguyen:
PWM-controlled rectifiers without the need of an extra synchronisation unit. 691-695 - Xiangdong Zong, Peter W. Lehn:
Reactive power control of single phase grid tied Voltage Sourced Inverters for residential PV application. 696-701 - Suresh Mikkili, Anup Kumar Panda:
Real-time implementation of power theory using FLC based shunt active filter with different fuzzy M.F.s. 702-707 - Qing-Chang Zhong, Wen-Long Ming, Xin Cao, Miroslav Krstic:
Reduction of DC-bus voltage ripples and capacitors for single-phase PWM-controlled rectifiers. 708-713 - Yonghuan Ding, Lei Li:
Research and application of high frequency isolated Quasi-Z-source inverter. 714-718 - Xin Chen, Zheng Wei, Huizhen Wang, Chensong Li, Chunying Gong:
Research of three-phase four-leg rectifier. 719-724 - Peng Zhao, Lan Xiao, Zilong Wang:
Research on a combined input-series output-parallel DC/DC converter. 725-729 - Ma Feng, Li Lei:
Research on constant-frequency hysteresis current control in differential three-level grid-connected inverter. 730-733 - Wenhua Liu, Xianghua Zhao, Qiang Song, Xiujuan Zhang:
Research on unbalance load compensation by cascaded STATCOM with star configuration. 734-738 - Takahiro Saeki, Hideaki Iura, Syuji Matsuda, Yoshiyasu Takase, Shinya Morimoto, Kozo Ide:
Robust active damping technique for three-phase PWM converter connected to power grid with unknown inductance. 739-744 - Mohamed Boutoubat, Lakhdar Mokrani, Mohamed Machmoum, François Auger:
Selective harmonics compensation using a WECS equipped by a DFIG. 745-750 - Dante Victor Shimoda Shimoda, Francisco Kleber de Araujo Lima, Carlos Gustavo C. Branco, René Pastor Torrico-Bascopé, Luiz Juarez Camuriça:
Single phase UPS with FACTS capabilities by using p-q Theory. 751-756 - Zito Palhano da Fonseca, Marcelo D. Pedroso, Arnaldo José Perin, Mauricio dos Santos Kaster, Claudinor B. Nascimento:
Single-stage high power factor converter without electrolytic capacitors to drive power LEDs. 757-762 - Woonki Na, Renee Kohl, Weider Chung:
Sliding mode control of a power factor corrected converter for Plug-In Hybrid Electric Vehicles. 763-767 - Hao Ma, Longyu Chen, Jing Li:
Soft switching design of isolated boost converter with coupled inductors. 768-773 - Mohamed Hamdi, Mahmoud Hamouda, Farhat Fnaiech, Kamal Al-Haddad:
Space vector pulse width modulation of multilevel inverters: A new method for selecting the appropriate small hexagon. 774-779 - Rafael Zanatta Scapini, Lucas Vizzotto Bellinaso, Leandro Michels:
Stability analysis of half-bridge rectifier employing LTP approach. 780-785 - Jaime Addin Rohten, José R. Espinoza, Felipe Villarroel, Marcelo A. Pérez, Javier A. Muñoz, Pedro E. Melin, Eduardo E. Espinosa:
Static power converter synchronization and control under varying frequency conditions. 786-791 - Benoit Bidoggia, Ramkrishan Maheshwari, Rasmus Ørndrup Nielsen, Stig Munk-Nielsen, Frede Blaabjerg:
Steady-state analysis of dead-time effect on bidirectional buck converters. 792-797 - Valentin Oleschuk, Joel Prieto, Federico Barrero:
Synchronous modulation of cascaded inverters of asymmetrical open-end winding motor drive. 798-803 - K. T. Mok, William Y. M. Lai, Chi Kong Tse, Ka Hong Loo:
Synthesis of two-state ladder-structured DC-DC power converters by duality principle. 804-809 - Bong-Chul Kim, Hong-Sun Park, SangCheol Moon, Young Do Kim, Duk-You Kim, Gun-Woo Moon:
The novel synchronous rectifier driving method for LLC series resonant converter. 810-813 - Zhiyu Cao, Junbing Tao, Norbert Fröhleke, Joachim Böcker:
Time-domain steady-state modeling of series-parallel resonant converter under optimized modulation. 814-820 - Fonkwe Fongang Edwin, Weidong Xiao, Vinod Khadkikar:
Topology review of single phase grid-connected module integrated converters for PV applications. 821-827 - Nicolas Patin, Maria Lluis Vinals:
Toward an optimal Heisenberg's closed-loop gate drive for Power MOSFETs. 828-833 - Liqun He, Jian Xiong, Hui Ouyang, Pengju Zhang, Kai Zhang:
Transient-free method of indirect current control for railway traction four-quadrant converters. 834-839 - Yen-Shin Lai, Bo-Yuan Chen:
Two-dimensional random PWM technique for full-bridge DC/DC converter. 846-851 - Jan M. Schellekens, Jorge L. Duarte, Henk Huisman, Marcel A. M. Hendrix:
Volume reduction of opposed current converters through coupling of inductors and interleaved switching. 852-857 - Tsukasa Misawa, Kazuaki Fukui, Hirotaka Koizumi:
Zero current switching Type Class DE rectifier. 858-863 - Sébastien Mariéthoz, Olivier Bethoux, Mickaël Hilairet:
A distributed model predictive control scheme for reducing consumption of hybrid fuel cell systems. 868-873 - Abdullah M. Noman, Khaled E. Addoweesh, Hussein M. Mashaly:
A fuzzy logic control method for MPPT of PV systems. 874-880 - F. Doostmohammadi, Ali Esmaili, Seyed Hossein Hesamedin Sadeghi, Adel Nasiri, Heidar A. Talebi:
A model predictive method for efficient power ramp rate control of wind turbines. 881-885 - Ahmed A. Hakeem, Ahmed M. Elserougi, Amr El Zawawi, Shehab Ahmed, Ahmed M. Massoud:
A modified modulation scheme for capacitor voltage control of renewable energy-fed grid-connected Z-Source Inverters. 886-893 - Salem Rahmani, Abdelhamid Hamadi, Kamal Al-Haddad, Hadi Youssef Kanaan:
A multifunctional power flow controller for photovoltaic generation systems with compliance to power quality standards. 894-903 - Aloña Berasategi, Carlos Paragua, Bruno Estibals, Youssef El Basri, Lionel Seguier, Adrien Ramond, Carlos Carrejo, Corinne Alonso:
An adaptive control developed for Multi-Phase Converters based on look-up tables and applied to photovoltaic conversion systems. 904-909 - Samareh Attarsharghi, Lyne Woodward, Ouassima Akhrif:
An improved maximum power extraction scheme for microbial fuel cells. 910-915 - Abdelhamid Hamadi, Salem Rahmani, Auguste Ndtoungou, Kamal Al-Haddad, Hadi Youssef Kanaan:
A new Maximum Power Point Tracking with indirect current control for a three-phase grid-connected inverter used in PMSG-based wind power generation systems. 916-923 - Mohamed Trabelsi, Khalid A. Ghazi, Nasser Al-Emadi, Lazhar Ben-Brahim:
An original controller design for a grid connected PV system. 924-929 - Mohamed A. E. Mahmoud, Bashar K. Hammad, Eihab M. Abdel-Rahman, Ehab F. El-Saadany, Raafat R. Mansour:
Analysis of out-of-plane Micro-Power Generators. 930-936 - Lina M. Elobaid, Ahmed Kadry Abdelsalam, Ezz Eldien Zakzouk:
Artificial neural network based maximum power point tracking technique for PV systems. 937-942 - Yongheng Yang, Frede Blaabjerg, Zhixiang Zou:
Benchmarking of Voltage Sag Generators. 943-948 - Yu-Yin Chen, Dejan Vasic, Yuan-Ping Liu, François Costa:
Comparison of bistable magnetic non-linear piezoelectric energy harvester with traditional linear technique. 949-954 - Oscar Carranza, Emilio Figueres, Gabriel Garcerá, Rubén Ortega:
Comparison of current control for low harmonic distortion applied to a small wind generation system with permanent magnet synchronous generator. 955-960 - Gonzalo Bustos, Luis S. Vargas, Freddy Milla, Doris Sáez, Hamid Zareipour, Alfredo Núñez:
Comparison of fixed speed wind turbines models: A case study. 961-966 - Marco Trapanese, Vincenzo Franzitta, Alessia Viola:
Description of hysteresis of Nickel Metal Hydride Battery. 967-970 - Jiawei Chen, Jie Chen, Chunying Gong, Huizhen Wang:
Design and analysis of dynamic wind turbine simulator for wind energy conversion system. 971-977 - Bhukya Mangu, Baylon G. Fernandes:
Efficiency improvement of solar-wind based dual-input Cuk-SEPIC converter for telecom power supply. 978-983 - Aidin Delnavaz, Jérémie Voix:
Electromagnetic micro-power generator for energy harvesting from breathing. 984-988 - Jie Chen, Jiawei Chen, Chunying Gong, Xiang Deng:
Energy management and power control for a stand-alone wind energy conversion system. 989-994 - Lakhdar. Belhadji, Seddik Bacha, Daniel Roye, Toufik Rekioua:
Experimental validation of direct power control of variable speed micro-hydropower plant. 995-1000 - Prajna Paramita Dash, Mehrdad Kazerani:
Harmonic elimination in a multilevel Current-Source Inverter-based grid-connected photovoltaic system. 1001-1006 - Fábio Lima, Fabiano Camargo Rosa, Marco Antonio Fumagalli:
High-speed grid connected induction generator supported by magnetic bearings. 1007-1012 - Celso B. Tischer, Fabio C. Posser, Lucas G. Scherer, Claiton M. Franchi, Robinson F. de Camargo:
Hybrid method for control of voltage regulation applied in micro hydro power station. 1013-1018 - Kumars Rouzbehi, Arash Miranian, Alvaro Luna, Pedro Rodríguez:
Identification and maximum power point tracking of photovoltaic generation by a local neuro-fuzzy model. 1019-1024 - Fadoul Souleyman Tidjani, Ambrish Chandra:
Integration of renewable energy sources and the utility grid with the Net Zero Energy Building in Republic of Chad. 1025-1030 - Yuan Fu, Yi Wang, Yingli Luo, Heming Li, Xiangyu Zhang:
Interconnection of wind farms with grid using a MTDC network. 1031-1036 - Andreas Uphues, Kilian Nötzold, Ralf Wegener, Stefan Soter, Richard Griessel:
Inverter based voltage sag generator with PR-controller. 1037-1042 - V. Sheeja, P. Jayaprakash, Bhim Singh, R. Uma:
Isolated wind energy conversion system for three-phase four wire loads employing Adaline based voltage-frequency controller. 1043-1048 - Francisco Giacometto, Juan J. Cárdenas, Konstantinos Kampouropoulos, Jose Luis Romeral:
Load forecasting in the user side using wavelet-ANFIS. 1049-1054 - Mounir Amokrane, Arnaud Baysse, Bertrand Nogarede, Mohamed Rguiti:
Low-voltage active diode rectifier for pyroelectric harvesting cell. 1055-1060 - Ronilson Rocha, José L. Silvino, Peterson Resende:
LQR with integral action for the control of variable speed induction generator connected to AC grid. 1061-1066 - Vigneshwaran Rajasekaran, Adel Merabet, Hussein Ibrahim, Rachid Beguenane, Jogendra Singh Thongam:
Maximum power point tracking and frequency control for hybrid wind diesel system supplying an isolated load. 1067-1072 - Claudio Bianchini, Fabio Immovilli, Emilio Lorenzani, Alberto Bellini, Giampaolo Buticchi:
Micro wind turbine system integration guidelines PMSG and inverter front end choices. 1073-1078 - Neha Adhikari, Bhim Singh, Anoop Lal Vyas, Ambrish Chandra, Kamal Al-Haddad:
Modeling and control of stand-alone wind energy conversion system with PMBLDC generator. 1085-1090 - Constantinos Sourkounis:
Multi-variable control of generator system for variable speed wind energy converters. 1091-1097 - Sina Hamzehlouia, Afshin Izadian:
Nonlinear state space model of a hydraulic wind power transfer. 1098-1103 - Ahmed A. Mohamed, Carlos Fernandez de Cossio, Tan Ma, Mustafa Farhadi, Osama Mohammed:
Operation and protection of photovoltaic systems in hybrid AC/DC smart grids. 1104-1109 - Manuel Vázquez-Rodriguez, Francisco Javier Jiménez, José De Frutos:
Optimal linear model for piezoelectric materials involved in road traffic energy harvesting applications. 1110-1115 - Tahar Tafticht, Ahmed Chériti:
Optimization of a stand-alone PMSG wind generation system. 1116-1119 - Xuan-Linh Dang, Emmanuel Hoang, Hamid Ben Ahmed, Marc Petit, Hong-Thinh Pham:
Optimization of Photovoltaic energy system: A case study of Hanoi city. 1120-1125 - Lila Croci, André Martinez, Patrick Coirault, Gérard Champenois, Jean-Paul Gaubert:
Passivity-Based Control of photovoltaic-wind hybrid system with Euler-Lagrange modeling. 1126-1131 - Nicola Femia, Walter Zamboni:
Photovoltaic-fed LED lighting system with SOC-based dimmable LED load. 1132-1137 - Ritwik Chattopadhyay, Kishore Chatterjee:
PV based stand alone single phase power generating unit. 1138-1144 - Yanqiao Chen, Liheng Liu, Hainan Cheng:
Research and designing of boiler-turbine model linearization balance operating point based on energy-saving and non-linear measurement analysis. 1145-1149 - Imad Mougharbel, Zeina Shehab, Semaan Georges:
Simulation of a hybrid renewable energy system in rural regions. 1150-1155 - Natalia A. Orlando, Antonella Nagliero, Rosa A. Mastromauro, Marco Liserre, Antonio Dell'Aquila:
Small wind turbines in grid-interactive microgrids. 1156-1161 - Mahdi Tohidian, Ali Esmaili, Ramezan Ali Naghizadeh, Seyed Hossein Hesamedin Sadeghi, Adel Nasiri, Ali M. Reza:
Use of adaptive linear algorithms for very short-term prediction of wind turbine power output. 1162-1165 - Miloud Rezkallah, Ambrish Chandra, Bhim Singh, Mohammed El Kahel:
Vector control of squirrel-cage induction generator for stand-alone wind power generation. 1166-1171 - Ali Chikh, Ambrish Chandra:
Voltage and frequency controller for a stand alone PV system with battery storage element. 1172-1177 - Reza Kazemi, Keyhan Sheshyekani, Seyed Hossein Hesamedin Sadeghi, Rouzbeh Moini, Adel Nasiri:
Wind turbine grounding system frequency-dependent modeling for lightning transient studies. 1178-1182 - Adel Aktaibi, Md. Azizur Rahman:
A new hybrid technique of control and protection for three phase power transformers. 1186-1191 - Mahmadasraf A. Mulla, Rajagopalan Chudamani, Anandita Chowdhury:
A novel control scheme for series hybrid active power filter using Generalised Instantaneous Power Theory. 1192-1197 - Liang Du, Lijun He, Ronald G. Harley:
A survey of methods for placing shunt capacitor banks in power network with harmonic distortion. 1198-1203 - Hammad A. Khan, Peter Bargiev, Victor Sreeram, Herbert H. C. Iu, Tyrone Lucius Fernando, Yateendra Mishra:
Active and reactive power control of synchronous generator for the realization of a virtual power plant. 1204-1210 - Saman Babaei, Babak Parkhideh, Subhashish Bhattacharya:
Analysis of 48-pulse based STATCOM and UPFC performance under balanced and fault conditions. 1211-1216 - Kaustav Basu, Vincent Debusschere, Seddik Bacha:
Appliance usage prediction using a time series based classification approach. 1217-1222 - Elyas Rakhshani, Alvaro Luna, Kumars Rouzbehi, Pedro Rodríguez:
Application of Imperialist Competitive Algorithm to design an optimal controller for LFC problem. 1223-1227 - Silvia Costa Ferreira, Robson Bauwelz Gonzatti, Carlos Henrique da Silva, Luiz Eduardo Borges da Silva, Germano Lambert-Torres, João O. P. Pinto:
Applying Adaptive Notch Filters to Hybrid Active Var Compensator. 1228-1233 - Xu She, Alex Q. Huang:
Circulating current control of double-star chopper-cell modular multilevel converter for HVDC system. 1234-1239 - Jenni Rekola, Antti Virtanen, Juha Jokipii, Heikki Tuusa:
Comparison of converter losses in an LVDC distribution. 1240-1245 - Sabha Raj Arya, Bhim Singh, Ambrish Chandra, Kamal Al-Haddad:
Control of shunt custom power device based on Anti-Hebbian learning algorithm. 1246-1251 - Vishal Verma, Lovely Goyal, Bhim Singh:
Control of VSC based multi-terminal DC system for support to critical loads on grid side witnessing loss of generation. 1252-1257 - Mustapha Sarra, Jean-Paul Gaubert, Abdelmadjid Chaoui, Fateh Krim:
Control strategy of a transformerless three phase shunt hybrid power filter using a robust PLL. 1258-1267 - Jakub Talla, Zdenek Peroutka, Seppo J. Ovaska, Vojtech Blahnik:
Current reference generator for single-phase shunt active power filters based on MGP-FIR. 1268-1273 - Bruno Exposto, J. G. Pinto, Delfim Pedrosa, Vitor Monteiro, Henrique Gonçalves, João Luiz Afonso:
Current-Source Shunt Active Power Filter with Periodic-Sampling Modulation Technique. 1274-1279 - Siriki Eswara Rao, Bishnu Prasad Muni, Prashant Jain, C. P. V. Krishna Reddy, P. V. Bala Subramanyam:
Development of 2.5MVAR STATCOM for arc furnace applications. 1280-1285 - Abdelmadjid Chaoui, Jean-Paul Gaubert, Abdelouahab Bouafia:
Direct power control concept and analysis for three phase shunt active power filter. 1286-1294 - Rolf Grünbaum, Jon Rasmussen:
FACTS for cost-effective improvement of power feeding of large mining complexes. 1295-1300 - Shin-Young Cho, Il-Oun Lee, Gun-Woo Moon:
Graphical small-signal modeling based on the inductor waveform. 1301-1305 - Apparao Dekka, Abdul Rahiman Beig, Youssef Abdel-Magid, Mohammad Salem Al Rahis:
Harmonic power filters for oil drilling rigs: A case study. 1306-1311 - Khairul Nisak Md Hasan, Kalle Rauma, Alvaro Luna, J. Ignacio Candela, Pedro Rodríguez:
Harmonic resonances damping using hybrid filter for WPP. 1312-1319 - Mohamed H. Okba, Mohamed H. Saied, Mohamed Z. Mostafa, Talaat M. Abdel-Moneim:
Harmonics in HVDC links, part I - Sources. 1320-1327 - Mohamed H. Okba, Mohamed H. Saied, Mohamed Z. Mostafa, Talaat M. Abdel-Moneim:
Harmonics in HVDC Links, part II - Effects and reduction techniques. 1328-1336 - Belkacem Mahdad, Kamel Srairi:
Hierarchical adaptive PSO for multi-objective OPF considering emissions based shunt FACTS. 1337-1343 - Pablo Acuña, Luis Morán, Marco Rivera, José Rodríguez, Juan W. Dixon:
Improved active power filter performance for distribution systems with renewable generation. 1344-1349 - Wei Cai, Yanyan Huang, Fangyuan Zhou, Qiang Wu, Huadong Liu, Caixiao Wang:
Independent DC capacitance parallel multiple module SVG based on CPS-SPWM. 1350-1355 - Shanmuga Veerapen, Robert T. F. Ah King:
Integrating distributed energy resources in the electrical grid considering resource variability for reliable power planning. 1356-1361 - Udhay Ravishankar, Milos Manic:
Iterative Learning Heuristic Dynamic Programming (ILHDP) design of a Steam Power Plant Controller. 1362-1367 - Martin Sirový, Zdenek Peroutka, Jan Michalik, Miroslav Byrtus:
Medium voltage fan save: Energy efficient fan systems in power engineering, part 1. 1368-1373 - Bayram Tounsi, Alexandre Henry, Luigi Vanfretti:
Modelling and dynamic analysis of offshore wind farms according to the French TSO grid code. 1374-1380 - Sicong Tan, Jian-Xin Xu, Sanjib Kumar Panda:
Optimization of distribution network incorporating microgrid using vaccine-AIS. 1381-1386 - Pierre J. Lagacé:
Power flow methods for improving convergence. 1387-1392 - Seyyedmilad Ebrahimi, Vahid Najmi, Hossein Mokhtari:
Reactive compensation investigation of TSC systems based on different power factor definitions. 1393-1398 - Eben-Ezer Prates da Silveria, Antonio Tadeu Lyrio de Almeida, Robson Celso Pires:
Real time capability curve based on data provided by the power system state estimator. 1399-1404 - Zhixin Mao, Zhihui Chen, Zhe Chen:
Research on the field current of a doubly salient electromagnetic generator with a half-controlled PWM rectifier. 1405-1409 - Xichun Ying, Mo-Yuen Chow:
Sampling rate selection influences on incremental cost consensus algorithm in decentralized economic dispatch. 1410-1415 - Carlos Henrique da Silva, Rondineli Rodrigues Pereira, Luiz Eduardo Borges da Silva, Germano Lambert-Torres, Robson Bauwelz Gonzatti, Silvia Costa Ferreira, Luiz Gonzaga Fernandez Silva:
Smart impedance: Expanding the hybrid active series power filter concept. 1416-1421 - Mostafa Farrokhabadi, Luigi Vanfretti:
State-of-the-art of topology processors for EMS and PMU applications and their limitations. 1422-1427 - Jingsong Zhu, Lei Li, Min Pan:
Study of a novel STATCOM based on modular multilevel inverter. 1428-1432 - Eben-Ezer Prates da Silveria, Antonio Tadeu Lyrio de Almeida, Ângelo José Junqueira Rezek, Robson Celso Pires:
Teaching voltage regulation using a TSC TYPE SVC. 1433-1438 - Dawei He, Weixuan Lin, Pascal Ntsama, Ronald G. Harley:
The return of investment analysis of a PHEV charging station with coordinated charging. 1439-1444 - Shin-Young Cho, Il-Oun Lee, Jeong-Eon Park, Gun-Woo Moon:
Two-stage configuration for 60W universal-line AC-DC adapter. 1445-1450 - Robert W. Cox:
A new interference-cancellation technique for instruments impacted by line-frequency signals. 1454-1457 - Sana Ktata, Halima Mahjoubi:
A zerotree coding for compression of ECG signal using EZW and SPIHT. 1458-1464 - Guangpu Huang, Meng Joo Er:
An adaptive control scheme for articulatory synthesis of plosive-vowel sequences. 1465-1470 - Dezhi Li, Wilson Wang, Fathy Ismail:
An enhanced GA technique for system optimization. 1471-1476 - Yuting Chen, Er Meng Joo:
Biomedical diagnosis and prediction using parsimonious fuzzy neural networks. 1477-1482 - Jefferson G. Martins, Luis S. Oliveira, Robert Sabourin:
Combining textural descriptors for forest species recognition. 1483-1488 - Danilo Samuel Jodas, Norian Marranghello, Aledir Silveira Pereira, Rodrigo Capobianco Guido:
Development of a support vector machine-based navigation system for driving a mobile robot through paths in plantations. 1489-1494 - Fatiha Merazka:
Differential quantization of spectral parameters for CELP based coders in packet networks. 1495-1498 - Kohjiro Hashimoto, Shinji Doki, Kae Doki:
Estimation of execution timing of human action considering causality between action and situation. 1499-1504 - Toshihiro Shinohara:
Expression of individual woven yarn of textile fabric by clustering three dimensional CT image using mahalanobis distance. 1505-1510 - Hirokatsu Kataoka, Kimimasa Tamura, Yoshimitsu Aoki, Yasuhiro Matsui:
Extended CoHOG and particle filter by improved motion model for pedestrian active safety. 1511-1516 - Yaileth Morales, Leonardo Díaz Marulanda, Fabio Vega, Cesar O. Torres, Lorenzo Mattos:
Fingerprint verification by correlation using wavelet compression of preprocessing digital images. 1517-1520 - Sandra M. Daza, Fabio Vega, Lorenzo Mattos, Cesar O. Torres, Leonardo Díaz Marulanda, Yailth Morales Daza:
Image encryption based on convolution operation in the gyrator transform domain. 1527-1529 - Ala Balti, Mounir Sayadi, Farhat Fnaiech:
Invariant and reduced features for Fingerprint Characterization. 1530-1534 - Thanh Ha Nguyen, Seung-Min Park, Kwang-Eun Ko, Kwee-Bo Sim:
Invariant common spatial pattern advanced feature extraction in mu rhythms of EEG signals. 1535-1539 - Renaud Daviot, Anne-Claire Conneau, Jean-Christophe Boissy:
LazerLab: A 3D scanner/tracer laser system with stereoscopic vision. 1540-1546 - Dusan Koniar, Libor Hargas, Stanislav Stofan, Marek Paskala:
Lightning unit control & design for high speed acquisition and light microscopy. 1547-1550 - Mohammadreza Motamedi, Farrokh Faramarzi, Olga Duran:
New concept for corrosion inspection of urban pipeline networks by digital image processing. 1551-1556 - Arash Maghsoudi, Mehran Jahed:
Optical flow-based motion estimation of ultrasonic images for force estimation in percutaneous procedures: Theory and experimental validation. 1557-1560 - Pharino Chum, Seung-Min Park, Kwang-Eun Ko, Kwee-Bo Sim:
Optimal EEG feature selection by genetic algorithm for classification of imagination of hand movement. 1561-1566 - Chungil Kim, Taeyeon Kim, Joon Lyou:
Realization of a MEMS attitude reference system for a small aerial vehicle. 1567-1570 - S. Arroyave, L. J. Hernandez, Leonardo Díaz Marulanda, Yaileth Morales, Fabio Vega, Lorenzo Mattos, Cesar O. Torres:
Recognition and identification of faces using digital correlation. 1571-1573 - Haijin Fan, Qing Song, Zhao Xu:
Recurrent online kernel recursive least square algorithm for nonlinear modeling. 1574-1579 - Mitsuharu Matsumoto:
Self-quotient-referential bilateral filter for images under varying lighting conditions. 1580-1584 - Salim Lahmiri, Christian S. Gargour, Marcel Gabrea:
Statistical features selection from intrinsic mode functions for pathologies detection in retina digital images. 1585-1590 - Félix Moreno, David Aledo:
The DLMT hardware implementation. A comparative study with the DCT and the DWT. 1591-1596 - Muhammad Mohsin Riaz, Abdul Ghafoor:
Wavelet transform and principal component analysis based clutter reduction for through wall imaging. 1597-1602 - Mohammed Obaid Mustafa, George Nikolakopoulos, Thomas Gustafsson:
A Fault diagnosis scheme for three phase induction motors based on uncertainty bounds. 1606-1611 - Atsushi Matsumoto, Masaru Hasegawa, Shinji Doki:
A flux-weakening control method on Maximum Torque Control frame for IPMSM position sensorless control. 1612-1617 - Kai-qi Zhao, Hongxing Wu, Zhong-wei Yu:
A novel direct torque control method with the compensation of rotating EMF to reduce torque ripple for permanent magnet synchronous motor drives. 1618-1624 - Nicolas Henwood, Jeremy Malaize, Laurent Praly:
A robust nonlinear Luenberger observer for the sensorless control of SM-PMSM: Rotor position and magnets flux estimation. 1625-1630 - Jae-Hoon Kim, Sang-Soo Lee, Rae-Young Kim, Dong-Seok Hyun:
A sensorless control using Extended Kalman Filter for an IPM synchronous motor based on an extended rotor flux. 1631-1636 - Delfim Pedrosa, Henrique Gonçalves, Bruno Exposto, Júlio S. Martins, João Luiz Afonso:
A simplified methodology for parameters measurement of an Axial Flux Permanent Magnet motor without neutral point. 1637-1642 - Silviano Rafael, Paulo J. Costa Branco, Armando J. Pires:
A study and design of a position tracking control for an 8/6 switched reluctance machine. 1643-1647 - Liuping Wang, Lu Gan:
A tutorial on PI velocity control of induction motors. 1648-1653 - Pierre Pellerey, Gwennael Favennec, Vincent Lanfranchi, Guy Friedrich:
Active reduction of electrical machines magnetic noise by the control of low frequency current harmonics. 1654-1659 - Hicham Chaoui, Pierre Sicard:
Adaptive vector control of permanent magnet synchronous machines with speed estimation. 1660-1665 - Tahar Achour, Maria Pietrzak-David:
An experimental test bench for a distributed railway traction mechanical load emulator. 1666-1671 - Yuchao Shi, Kai Sun, Yan Guo, Xiaohua Jiang, Lipei Huang, Yongdong Li:
An improved rotor speed estimation method of IPMSM drives with cyclic fluctuating load. 1672-1677 - Peter Nussbaumer, Christian Santin, Thomas M. Wolbank:
Analysis of current reaction on inverter-switching to detect changes in electrical machine's high-frequency behavior. 1678-1683 - Manuele Bertoluzzo, Giuseppe Buja, Ritesh Kumar Keshri, Roberto Menis:
Analytical study of Torque vs. speed characteristics of PM brushless DC drives. 1684-1689 - Raymundo Cordero Garcia, Walter Issamu Suemitsu, João O. P. Pinto, Andre Muniz Soares, Rene A. Capitanio:
Application of frequency domain multiplexing for the reduction of ADCs in vector control of PMSM. 1690-1695 - Lu Gan, Liuping Wang:
Cascaded continuous-time model predictive control of induction motor. 1696-1701 - Mohammad Ali Ghazimoghadam, Farzad Tahami:
Compensation of transient error in sensorless alternating carrier injection scheme. 1702-1706 - Kota Teramoto, Kiyoshi Ohishi, Shingo Makishima, Keiichi Uezono, Shinobu Yasukawa:
Cooperative control of regenerative brake and mechanical brake for a two coach train. 1707-1712 - Rodrigo Zelir Azzolin, Thiago A. Bernardes, Rodrigo Padilha Vieira, Cristiane Cauduro Gastaldini, Hilton Abílio Gründling:
Decoupling and sensorless vector control scheme for single-phase induction motor drives. 1713-1719 - Siavash Pakdelian, Hamid A. Toliyat:
Design aspects of the Trans-Rotary Magnetic Gear. 1720-1725 - Jian-Cheng Zhang, Xiaoyan Huang, Youtong Fang, Zi-kui Ma:
Design of interior PM synchronous traction motor with novel approximate skewed rotor. 1726-1730 - Sebastian Gruber, Ralf Wegener, Stefan Soter:
Detent force reduction of a tubular linear drive by using a genetic algorithm and FEM - verification of simulation results. 1731-1736 - Abdallah Barakat, Slim Tnani, Gérard Champenois, Emile Mouni:
Direct control strategy of synchronous generators using DC/DC converter. 1737-1741 - Rodrigo Padilha Vieira, Cristiane Cauduro Gastaldini, Rodrigo Zelir Azzolin, Hilton Abílio Gründling:
Discrete-time sliding mode rotor flux and rotor speed observer for induction machine drives. 1742-1747 - Mohammadnaser Hashemnia, Farzad Tahami:
Dynamic modeling and simulation of brushless doubly fed induction machine in consideration of core loss. 1753-1757 - Mini Rajinder a Sreejeth, Madhusudan Singh, Parmod Kumar:
Efficiency optimization of vector controlled induction motor drive. 1758-1763 - Prabhakar Neti, Pinjia Zhang, Manoj Shah, Karim Younsi:
Electrical signature analysis based online monitoring of drive-trains for doubly-fed wind generators. 1764-1769 - Anthony Frias, Afef Kedous-Lebouc, Christian Chillet, Laurent Albrt, Lionel Calegari:
Citation in machine. 1770-1774 - Florian Senicar, Alexander Bartsch, Benjamin Krüger, Stefan Soter:
Enhanced bandwidth current controller for FPGA based inverter drives - a detailed analysis and implementation. 1775-1780 - Sven Exnowski:
Excitability of different modes of vibration of stator end windings. 1781-1785 - Ricardo Pérez, César A. Silva, Juan I. Yuz, Gonzalo Carrasco:
Experimental sensorless vector control performance of a DFIG based on an extended Kalman filter. 1786-1792 - Naveed-ur-Rehman Malik, Chandur Sadarangani:
Extended vector control of a rotating power electronic brushless doubly-fed induction generator under unsymmetrical voltage sags. 1793-1798 - Shan Chai, Liuping Wang:
Finite Control Set Model Predictive Control of 2LVSI-PMSM using interpolated switching states. 1799-1804 - E. Ben Sedrine, Javier Ojeda, Ilhem Slama-Belkhodja, Mohamed Gabsi:
Five-Phase Flux Switching Machine: Optimal current waveforms in order to improve open phase operation. 1805-1810 - Sofiane Fahas, Hoang Le-Huy, Innocent Kamwa:
Fuzzy direct torque control of switched reluctance motors. 1811-1816 - Naser M. B. Abdel-Rahim:
Fuzzy-Logic control of unsymmetrical two-phase induction motor. 1817-1822 - Victoria Herrera, Javier Alexis Andrade-Romero, Jesus Franklin Andrade Romero:
Global Wavelet Spectrum based fault detection for Self-Excited Induction Generator. 1823-1828 - Shah A. Rahman, Andy M. Knight:
Impact of heat treatment on core properties and IPMSM performance. 1829-1834 - Jose Roberto Marques, Izabel Fernanda Machado, José Roberto Cardoso:
Induction motor parameter determination using the harmony search algorithm to power, torque and speed estimation. 1835-1840 - Francisco Jose Pérez-Cebolla, Abelardo Martinez-Iturbe, Bonifacio Martín-del-Brío, Eduardo Laloya, Sylvia Mendez:
Influence of non-ideal magnetic core effects on the experimental determination of the magnetic characteristics of a switched reluctance motor. 1841-1846 - Aldo Boglietti, Radu Bojoi, Andrea Cavagnino, Silvio Vaschetto:
Influence of the sinusoidal supply frequency on the induction motor stray load losses. 1847-1851 - Simon Feuersanger, Mario Pacas:
Initial rotor position identification in medium voltage synchronous machines. 1852-1857 - Ana Maria Gazdac, Augustin Mpanda Mabwe, Franck Betin, Claudia Steluta Martis, Karoly Biro:
Investigation on the thermal behavior of the dual-rotor Permanent Magnet Induction Machine. 1858-1863 - Ivo Herman, Pavel Vaclavek:
Load torque and moment of inertia observability analysis for alternating current drive sensorless control. 1864-1869 - Aldo Boglietti, Andrea Cavagnino, Alberto Tenconi:
Low cost solutions to reduce cogging torque and acoustic noise of small brushed DC motors for automotive radiator Cooling Fan Modules. 1870-1876 - Václav Smídl, Zdenek Peroutka:
Marginalized particle filter for sensorless control of PMSM drives. 1877-1882 - Enrico Concettoni, Cristina Cristalli, Stefano Serafini:
Mechanical and electrical quality control tests for small DC motors in production line. 1883-1887 - Luca Peretti, Ville Särkimäki:
Mechanical drive train emulation by means of electrical drives - a generalised approach. 1888-1893 - Maxim Bogomolov, Christian Kral, Anton Haumer, Elena A. Lomonova:
Modeling of permanent magnet synchronous machine with fractional slot windings. 1894-1899 - Nysret Z. Avdiu:
Modeling of the induction motor with two sets of three phase windings in the stator and squirrel cage rotor. 1900-1907 - Muhammad Ali Masood Cheema, John E. Fletcher, M. F. Rahman, Dan Xiao:
Modified direct thrust control of linear permanent magnet motors with sensorless speed estimation. 1908-1914 - K. Mathew, K. Gopakumar, Jaison Mathew, Najath Abdul Azeez, Anubrata Dey, Loganathan Umanand:
Multilevel octadecagonal space vector generation for induction motor drives by cascading asymmetric three level inverters. 1915-1920 - Syaiful Bakhri, Nesimi Ertugrul, Wen L. Soong:
Negative sequence current compensation for stator shorted turn detection in induction motors. 1921-1926 - Jemimah C. Akiror, Pragasen Pillay:
On the coefficients of core loss formulas for electrical machines. 1927-1933 - Ramin Salehi Arashloo, Mehdi Salehifar, Jose Luis Romeral Martinez:
On the effect of accessible neutral point in fault tolerant five phase PMSM drives. 1934-1939 - Naoki Miyamoto, Kiyoshi Ohishi:
Online tuning method for current measurement offsets and gain deviations for SPMSM. 1940-1945 - Mahshid Amirabadi, Hamid A. Toliyat, William C. Alexander:
Partial resonant AC link converter: A highly reliable variable frequency drive. 1946-1951 - Raymundo Cordero Garcia, Walter Issamu Suemitsu, João O. P. Pinto, Andre Muniz Soares, Rene A. Capitanio:
Position control of PMSM based on augmented Fuzzy Takagi-Sugeno SISO models and LMIs. 1952-1957 - Slavomir Kascak, Michal Prazenica, Branislav Dobrucký:
Position control of Two-Phase Induction motor using dSpace environment. 1958-1963 - Kohei Fujii, Yang Zhao, Shinji Doki:
Position estimation method which is suitable for highly magnetic saturation of IPMSM. 1964-1969 - Said Hassaine, Bilal Sari, Sandrine Moreau, Benyounès Mazari:
Rapid prototyping of a multivariable control with pole placement by state feedback of a PMSM: LMI approach. 1970-1975 - Said Hassaine, Sandrine Moreau, Sofiane Gherbi, Moussa Sedraoui, Benyounès Mazari:
Real time implementation of a robust controller for PMSM drive system using H∞ norm. 1976-1981 - Wang Weihua, Xiao Xi:
Research on predictive control for PMSM based on online parameter identification. 1982-1986 - Horacio B. Polli, Fabio Rosa, Luiz H. R. C. Stival, Ademir Nied, José de Oliveira:
Sensorless indirect vector control of an induction machine with a Scott-T connection in the stator. 1987-1992 - Sang-Soo Lee, Jae-Hoon Kim, Byoung-Gun Park, Dong-Seok Hyun:
Sensorless induction motor control with improved stator flux estimator by programmable LPF. 1993-1998 - Martin Ganchev, Christian Kral, Thomas Wolbank:
Sensorless rotor temperature estimation of permanent magnet synchronous motor under load conditions. 1999-2004 - Biji Jacob, M. R. Baiju:
Space vector based Dithered Sigma Delta Modulator for two-level inverter to suppress the harmonic spikes. 2005-2011 - Kvetoslav Belda, David Vosmik:
Speed control of PMSM drives by generalized predictive algorithms. 2012-2017 - Mehdi Farasat, Ekrem Karaman, Andrzej M. Trzynadlowski, M. Sami Fadali:
Speed sensorless instantaneous power control of induction motor drives. 2018-2023 - Yateendra Deshpande, Hamid A. Toliyat, Xiaoyan Wang:
Standstill position estimation of SPMSM. 2024-2029 - Mohammadnaser Hashemnia, Farzad Tahami:
Steady state analysis of brushless doubly fed induction machine taking core loss into account. 2030-2035 - Ming Yang, Siyu Tang, Junxin Tan, Dianguo Xu:
Study of on-line backlash identification for PMSM servo system. 2036-2042 - Gilles Vogt, Raphaël Romary, Guillaume Parent, Valentin Costane:
Study of stator core-end packets under the action of two incident fluxes - Real scale model. 2043-2048 - Victor Regis Bernardeli, Darizon Alves de Andrade, Luciano Coutinho Gomes, A. W. F. V. Silveira, Ghunter Paulo Viajante, A. B. Fernandes:
Switched reluctance machine modeling including core magnetic saturation - the self-excited operation mode. 2049-2054 - Igor Erceg, Stjepan Tusun, Gorislav Erceg:
The use of programmable automation controller in synchronous generator excitation system. 2055-2060 - Riccardo Antonello, Matteo Carraro, Mauro Zigliotto:
Theory and implementation of a MTPA tracking controller for anisotropic PM motor drives. 2061-2066 - Arun Gandhi, Leila Parsa:
Thrust optimization of a five-phase fault-tolerant flux-switching linear synchronous motor. 2067-2073 - Szymon Racewicz, Piotr J. Chrzan, Delphine M. Riu, Nicolas M. Retiere:
Time domain simulations of synchronous generator modelled by half-order system. 2074-2079 - Francesco Cupertino, Stefano Ettorre:
Torque production capabilities of electrical machines with planar windings. 2080-2085 - Seyed Alireza Davari, Davood Arab Khaburi, Ralph Kennel:
Using a weighting factor table for FCS-MPC of induction motors with extended prediction horizon. 2086-2091 - Xiaofan Fu, Louis-A. Dessaint, Richard Gagnon, Keliang Zhou, Ming Cheng:
A comparative study of control schemes for VSCHVDC transmission system. 2096-2103 - Arash Maghsoudi, Mehran Jahed:
A comparison between disturbance observer-based and model-based control of needle in percutaneous applications. 2104-2108 - Aditya Singh, John Y. Hung, Bob J. Selfridge:
A hybrid backstepping-like nonlinear control of a robot-trailer system. 2109-2114 - Limin Liu:
A MIMO intelligent control for ball mill systems. 2115-2120 - Jean Sawma, Flavia Khatounian, Eric Monmasson:
A modified cross-correlation method for the identification of systems with large bandwidth. 2121-2126 - Hidetoshi Oya, Yuji Morishima, Kojiro Hagino:
A new variable gain controller for a class of uncertain linear systems via piecewise Lyapunov functions - Less conservative LMI conditions -. 2127-2131 - Davide Cattin, Emre Sariyildiz, Kouhei Ohnishi:
A null-space-based control for cable driven manipulators. 2132-2137 - Chao Deng, Guillaume Colin, Yann Chamaillard, Dominique Nelson-Gruel:
Sequential robust control design methodology application to the MIMO air path of a diesel engine. 2138-2143 - Daiki Suzuki, Kouhei Ohnishi:
A skill proficiency evaluation method of individual based on accuracy and repeatability. 2144-2149 - Christopher G. Wilson, John Y. Hung, Robert Neal Dean:
A sliding mode controller for two-phase synchronous buck converters. 2150-2155 - Hassan A. Yousef, Mohamed Hamdy:
Adaptive fuzzy flatness-based excitation control for power system generators. 2156-2161 - Sina Hamzehlouia, Afshin Izadian:
Adaptive speed regulation of gearless wind energy transfer systems. 2162-2167 - Carolina Albea, Diego Puschini, Suzanne Lesecq, Yeter Akgul:
Advanced coupled voltage-frequency control for power efficient DVFS management. 2168-2173 - Claudia Fischer, Sébastien Mariéthoz, Manfred Morari:
An optimal modulation strategy for minimising the losses of isolated multisource DC-DC converters. 2174-2179 - Tarik Ferhatbegovic, Gerhard Zucker, Peter Palensky:
An unscented Kalman filter approach for the plant-model mismatch reduction in HVAC system model based control. 2180-2185 - Sau Kin Ng, Ka Hong Loo, William Y. M. Lai, Chi K. Tse:
Color control in RGB driver system applicable to LED of all ageing conditions. 2186-2191 - Gholamreza Farahani:
Computing optimum coefficients of PID controller with genetic algorithm. 2192-2197 - Bas J. D. Vermulst, C. M. M. van Lierop, Jorge L. Duarte:
Control of a hysteretic electromagnetic electron lens system. 2198-2203 - Tomoyuki Sakuma, Takuma Nemoto, Masami Iwase, Shoshiro Hatakeyama, Masaki Izutsu:
Control system design for robot arms playing inside-loop yoyo trick. 2204-2209 - Olorunfemi Ojo, Hossein Karimi-Davijani:
Controllability analysis of IPM generator connected through LCL filter to the grid. 2210-2215 - Bao-Lin Zhang, Zuo-Wu Huang, Qing-Long Han:
Delayed non-fragile H∞ control for offshore steel jacket platforms. 2216-2221 - Yasuaki Kaneda, Yasuharu Irizuki, Masaki Yamakita:
Design method of robust Kalman filter via ℓ1 regression and its application for vehicle control with outliers. 2222-2227 - Kumar Gaurav, Shaktidev Mukherjee:
Design of artificial neural network controller for continually stirred tank heater. 2228-2231 - Fabiano Camargo Rosa, Fábio Lima, Marco Antonio Fumagalli:
Development of a high-speed turbo-generator supported by active magnetic bearings. 2232-2237 - Jihoon Kim, Namju Jeon, Hyeongcheol Lee:
Development of optimization algorithm for green drive on roads with continuous curves. 2238-2244 - Mario Rizo, Ana Rodríguez, Francisco J. Rodríguez, Emilio Bueno, Marco Liserre:
Different approaches of stationary reference frames saturators. 2245-2250 - Rijaniaina N. Andriamalala, Hubert Razik, Bruno François, Xavier Guillaud:
Direct Rotor Field-Oriented Control of a Dual Three-Phase Induction Machine using a novel Kalman observer. 2251-2256 - Mohammed Zaheeruddin, Nicolae Tudoroiu:
Dual EKF estimator for fault detection and isolation in Heating Ventilation and Air Conditioning systems. 2257-2262 - Steffen Büchner, Stephan Zschäck, Arvid Amthor, Christoph Ament, Mike Eichhorn:
Dynamic friction modeling and identification for high precision mechatronic systems. 2263-2268 - Fuminao Tayama, Noriyuki Hori, Camille Alain Rabbath:
Effects of sampling-period on pole-locations in yaw-angle control via a deflecting nozzle. 2269-2274 - Vincent Roberge, Mohammed Tarbouchi:
Efficient parallel Particle Swarm Optimizers on GPU for real-time harmonic minimization in multilevel inverters. 2275-2282 - Mrinal Kanti Sarkar, Subrata Banerjee, Sakti Prasad Ghoshal:
Evolutionary computation based optimization of controller parameters for an Electromagnetic Levitation System. 2283-2288 - Likhita Gavini, Afshin Izadian:
Feed-forward excess passivity-based control of buck-boost converters. 2289-2294 - Jinwoo Lee, Dongyeop Kang, Sangchul Won:
Finite-time observer-based synchronization for a class of uncertain chaotic systems using adaptive terminal sliding mode control. 2295-2300 - Amir Badkoubeh, Guchuan Zhu:
Flatness-based deformation control of a 1-dimensional microbeam with in-domain actuation. 2301-2306 - Hassan A. Yousef, Mohamed Hamdy:
Fuzzy observer-based adaptive control for a class of nonlinear systems with unknown time delays. 2307-2312 - Samir Boudria, Guy Gauthier:
High order robust Terminal Iterative Learning Control design using Genetic Algorithm. 2313-2318 - Sining Liu, Xinjun Sheng, Zhi Li, Chun-Yi Su:
Inverse control of a class of nonlinear systems with modified generalized Prandtl-Ishlinskii hysteresis. 2319-2324 - Mahmut Reyhanoglu, Jaime Rubio Hervas:
Magnetic attitude control design for small satellites via slowly-varying systems theory. 2325-2330 - Stephan Zschäck, Steffen Büchner, Arvid Amthor, Christoph Ament:
Maxwell Slip based adaptive friction compensation in high precision applications. 2331-2336 - Shaolin Tan, Jinhu Lu, Xinghuo Yu, David J. Hill:
Monotonicity of fixation probability of evolutionary dynamics on complex networks. 2337-2341 - Benoît Huard, Mathieu Grossard, Sandrine Moreau, Thierry Poinot:
Multi-model observer and state feedback position control of a flexible robotic actuator. 2342-2347 - Yasser A. Alamoudi, Glynn J. Atkinson, Barrie C. Mecrow, Min Zhang:
A new high torque density permanent magnet machine design for electric vehicles. 2348-2353 - Cuili Yang, Wallace Kit-Sang Tang, Qiang Jia:
Node selection and gain assignment in pinning control using genetic algorithm. 2354-2359 - Philip Dost, Sebastian R. Jarzabek, Constantinos Sourkounis:
Novel hysteresis controller based on a rotating coordinate system with direct d and q constraint. 2360-2365 - Shin Kawai, Noriyuki Hori:
On bi-proper mapping discretization of a regular descriptor system. 2366-2371 - Xiefu Jiang, Qing-Long Han:
On delay-derivative-dependent sampled-data fuzzy control design for T-S model-based fuzzy systems with interval time-varying delay. 2372-2377 - Marcos Orellana, Robert Griñó:
On the stability of discrete-time active damping methods for VSI converters with a LCL input filter. 2378-2383 - Satakshi, S. Mukherjee, R. C. Mittal:
Order reduction using mixed method. 2384-2388 - Mahmut Reyhanoglu, Jaime Rubio Hervas:
Partial-state feedback control design for liquid container transfer with sloshing suppression. 2389-2393 - Niranjan Saikumar, N. S. Dinesh:
Position control of DC motors with Experience Mapping based Prediction Controller. 2394-2399 - Soo-Cheol Shin, Chi-Hwan Choi, Jang-Hyoun Youm, Taeck-Kie Lee, Chung-Yuen Won:
Position control of PMSM using jerk-limited trajectory for torque ripple reduction in robot applications. 2400-2405 - Michal Málek, Rastislav Kastier, Martin Hrasko:
Precise position control of two-axes pan/tilt system in extreme environment. 2406-2409 - Martin R. Licea, Ilse Cervantes:
On the predictive rollover detection in wheeled vehicles. 2410-2415 - Oussama Ait Sahed, Kamel Kara, Mohamed Laid Hadjili:
PSO-based fuzzy predictive control. 2416-2421 - Yee-Jin Cheon:
Quaternion feedback control for gyroless target pointing of underactuated spacecraft. 2422-2426 - Wataru Kase:
Regularization for polynomial matrices and its application to descriptor systems. 2427-2432 - Ayaka Matsui, Seiichiro Katsura:
Reproduction of haptic data in grasping and manipulating operations. 2433-2438 - Joao Teixeira de Carvalho Neto, Anderson Luiz de Oliveira Cavalcanti, Andrés Ortiz Salazar:
Robust control applied in Buck Boost converter in a photovoltaic system: A new proposal. 2439-2446 - Joel Steenis, Konstantinos Tsakalis, Raja Ayyanar:
Robust control of an islanded microgrid. 2447-2451 - Yun She:
Robust controller design of automotive valve for purpose of emission regulation. 2452-2457 - Rajamani Doraiswami, Lahouari Cheded:
Robust fault-tolerant controller design. 2458-2463 - Anh-Tu Nguyen, Jimmy Lauber, Michel Dambrine:
Robust H∞ control for the turbocharged air system using the multiple model approach. 2464-2469 - Emre Sariyildiz, Kouhei Ohnishi:
Robust stability analysis of the system with disturbance observer: The real parametric uncertainty approach II. 2470-2475 - Xiao-Bo Chi, Xinchun Jia, Qing-Long Han:
Sampled-data stabilization for Takagi-Sugeno fuzzy systems using membership function deviations. 2476-2481 - Sung-Hua Chen, Chin-Teng Lin, Li-Chen Fu:
Second order sliding mode control on task-space of a 6-DOF Stewart platform. 2482-2487 - Ayse Cisel Aras, Okyay Kaynak, Rahib H. Abiyev:
Slip control of a quarter car model based on type-1 fuzzy neural system with parameterized conjunctions. 2488-2493 - Hamed Rezaei, Mohammad Javad Khosrowjerdi, Ali Saadat:
SMO-based fault tolerant control design for three phase induction motors. 2494-2499 - Mircea-Bogdan Radac, Radu-Emil Precup, Emil M. Petriu, Bogdan-Stefan Cerveneak, Claudia-Adina Dragos, Stefan Preitl:
Stable Iterative Correlation-based Tuning algorithm for servo systems. 2500-2505 - Haijun Fang:
State-space model of a class of switched-mode DC-DC power supply. 2506-2511 - Jeng-Dao Lee, Suiyang Khoo, Kwei-Yuan Lai:
Terminal sliding mode control strategy design for second-order nonlinear system. 2512-2517 - Yi Yuan, François Auger, Luc Loron, Stephane Moisy, Mathieu Hubert:
Torque ripple reduction in Permanent Magnet Synchronous Machines using angle-based iterative learning control. 2518-2523 - Jorge Hurel, Anthony Mandow, Alfonso García-Cerezo:
Tuning a fuzzy controller by particle swarm optimization for an active suspension system. 2524-2529 - Philip Dost, Andreas Steimel, Carsten Heising:
Underdetermined multivariable Dead-Beat Controller. 2530-2535 - Daniel Dolz, Ignacio Peñarrocha, Néstor Aparicio, Roberto Sanchis:
Virtual torque control in wind generation with doubly fed induction generator. 2536-2541 - Yusei Tsuruo, Toshiyuki Murao, Hiroyuki Kawai, Masayuki Fujita:
Visual motion observer-based pose control via obstacle avoidance navigation function for eye-in-hand systems. 2542-2547 - Irwin A. Diaz-Diaz, Luis Alejandro Marquez Martinez, Ricardo Nunez:
A simple high-performance respiratory sound acquisition instrument. 2552-2556 - Denis Dondi, Stefano Scorcioni, Alessandro Bertacchini, Luca Larcher, Paolo Pavan:
An autonomous wireless sensor network device powered by a RF energy harvesting system. 2557-2562 - Francisco Javier Jiménez, José De Frutos, Manuel Vázquez-Rodriguez:
Automatic verification system for Doppler kinemometers. 2563-2566 - Hisashi Igawa, Takayuki Tanaka, Shun'ichi Kaneko, Tatsumi Tada, Shin'ichi Suzuki, Isao Ohmura:
Base position detection of grape stem considering its displacement for weeding robot in vineyards. 2567-2572 - Hidetaka Morimitsu, Seiichiro Katsura:
Design of temperature control system toward thermal display with fast and precise response. 2573-2578 - Maryam Etezad, Mojtaba Kahrizi, Kash Khorasani:
Detection of transverse load using the high birefringence bragg grating and genetic algorithm. 2579-2582 - José Pedro Amaro, Fernando J. T. E. Ferreira, Rui Cortesão, Jorge Landeck:
Energy harvesting for Zigbee compliant Wireless Sensor Network nodes. 2583-2588 - Eiichi Saito, Seiichiro Katsura:
Force control of two-mass resonant system with vibration suppression based on modal transformation. 2589-2594 - Hitoshi Kimura, Masashi Nakamura, Kodai Katou, Norio Inou, Minoru Yoshida:
Identification method of sensor directions and sensitivities in multi-axis accelerometer. 2595-2600 - Kento Nishibori, Kenji Nishibori:
Measurements of inclination angle and distance of curved mirror using LED light sources. 2601-2606 - Yutaka Nojiri, Nobutaka Tsujiuchi, Takayuki Koizumi, Tomoyuki Mizuno, Yasunori Ichikawa, Mikio Shimizu:
Modeling and force control of membrane pneumatic actuators. 2607-2612 - Yoshihiro Ohnishi, Seiichiro Katsura:
Modeling and personal recognition of calligraphy task using haptic data. 2613-2618 - Hicham Chaoui, Pierre Sicard, James Lee, Alfred Ng:
Neural network modeling of cold-gas thrusters for a spacecraft formation flying test-bed. 2619-2621 - Raul Aragonés, Joan Oliver, Carles Ferrer:
Ultra-low temperature dependent ROIC for capacitive sensing platforms. 2622-2627 - Shunsuke Yajima, Seiichiro Katsura:
Velocity based motion-copying system for integrated reproduction of motion components. 2628-2633 - Kyohei Umemoto, Toshiyuki Murakami:
A position tracking control of two wheel mobile manipulator using COG trajectory based on zero dynamics. 2638-2643 - Hicham Chaoui, Pierre Sicard:
Adaptive neural network control of flexible-joint robotic manipulators with friction and disturbance. 2644-2649 - Kiyotoshi Komuta, Toshiyuki Murakami:
An approach to expansion of workspace motion in master-slave control system. 2650-2655 - Sho Sakaino, Toshiaki Tsuji:
An extended Jacobian matrix and multirate control for bilateral control between different time resolution systems. 2656-2661 - Takahiro Nozaki, Takahiro Mizoguchi, Kouhei Ohnishi:
Bilateral control method for tendon-driven mechanism considering wire elongation. 2662-2667 - Mohammad Habibur Rahman, Maarouf Saad, Cristóbal Ochoa-Luna, Jean-Pierre Kenné, Philippe S. Archambault:
Cartesian trajectory tracking of an upper limb exoskeleton robot. 2668-2673 - Michael L. Payne, John Y. Hung, David M. Bevly, Bob J. Selfridge:
Control of a robot-trailer system using a single non-collocated sensor. 2674-2679 - Raouf Fareh, Mohamad R. Saad, Maarouf Saad:
Design and experimental validation of a hierarchical control strategy for 7 DOF manipulators. 2680-2685 - Joseph L. Amato, Jon J. Anderson, Thomas J. Carlone, Michael E. Fagan, Kenneth A. Stafford, Taskin Padir:
Design and experimental validation of a mobile robot platform for analog planetary exploration. 2686-2692 - Gurkan Tuna, Kayhan Gulez, Vehbi Çagri Güngör, Tarik Veli Mumcu:
Evaluations of different Simultaneous Localization and Mapping (SLAM) algorithms. 2693-2698 - Anbin Xiong, Guangmo Lin, Xingang Zhao, Jianda Han, Guangjun Liu:
Feasibility of EMG-based ANN controller for a real-time virtual reality simulation. 2699-2704 - Hiromu Onda:
Formulation of packing problem applying densest packing algorithms to planning of packing for robot. 2705-2712 - Sho Maeda, Nobutaka Tsujiuchi, Takayuki Koizumi, Isao Nakai, Mitsumasa Sugiura:
Gripping strategy of pneumatic robot arm for industrial fields wrist control in consideration of compensation of gravity. 2713-2718 - Nobuaki Nakazawa, Takashi Mori, Ilhwan Kim, Toshikazu Matsui, Kou Yamada, Aya Maeda:
Hand-free interface based on facial orientations. 2719-2724 - Ren C. Luo, Yen-Chang Wu:
Human-robot interaction with multi-sensor fusion based hand sign recognition for service robot. 2725-2730 - Keita Shimamoto, Kouhei Ohnishi:
Motion control for 2-DOF tendon-driven spherical joint mechanisms. 2731-2736 - Víctor H. Andaluz, Paúl A. Canseco, Andrés Rosales, Flavio Roberti, Ricardo O. Carelli:
Multilayer scheme for the adaptive cooperative coordinated control of mobile manipulators. 2737-2743 - Ryo Kojima, Nobutaka Tsujiuchi, Takayuki Koizumi, Masahiro Masuguchi:
Multipurpose optimization of camera position by modeling image noise in camera for robot vision. 2744-2749 - Jesus D. Terrazas Gonzalez, Greg Linton, Wai-Keung Fung, Rob Barwell:
ON internet based supermedia enhanced telepresence via cellular data network. 2750-2755 - Javier Moreno-Valenzuela, Ricardo Campa, Victor Santibañez:
On passivity-based control of a class of electrically driven robots. 2756-2761 - Xin Yu, John Y. Hung:
Optimal path planning for an autonomous robot-trailer system. 2762-2767 - Hiroyuki Fujioka, Hiroyuki Kano:
Recursive motion planning using optimal vector smoothing splines with cross-coupled constraints. 2768-2773 - Irene Rivas-Blanco, Pablo del Saz-Orozco, Isabel García-Morales, Victor F. Muñoz:
Robotic system for single incision laparoscopic surgery. 2774-2779 - M. Abdeetedal, Heidar A. Talebi, Farzaneh Abdollahi:
Scale-dependent method for whole arm grasp evaluation. 2780-2785 - Riccardo Antonello, Omar A. Daud, Roberto Oboe, Enrico Grisan:
Stability of a telerobotic manipulation system with proximity - Based haptic feedback. 2786-2792 - Takeshi Mizuno, Yuji Ishino, Masaya Takasaki:
Study on the observability of double parallel magnetic suspension systems. 2793-2797 - Mario Collotta, Luca Gentile, Giovanni Pau, Gianfranco Scatà:
A dynamic algorithm to improve industrial Wireless Sensor Networks management. 2802-2807 - Salvatore Cavalieri, Ferdinando Chiacchio:
A SAN model for the analysis of the flow control congestion mechanism of KNXnet/IP. 2808-2813 - Caglar Tirkaz, Dietmar Bruckner, GuoQing Yin, Jan Haase:
Activity recognition using a hierarchical model. 2814-2820 - Xiang Li, Meng Joo Er, Hailin Ge, Oon Peen Gan, Sheng Huang, Lain-Yin Zhai, Linn San, Amin Jahromi Torabi:
Adaptive Network Fuzzy Inference System and support vector machine learning for tool wear estimation in high speed milling processes. 2821-2826 - Oihane Kamara Esteban, Yoseba K. Penya:
Energy-aware foundry production scheduling. 2827-2832 - Cleber A. Sarmento, Diolino J. Santos Filho, Paulo E. Miyagi:
Extending the verification coverage for PLC control programs: A functional safety approach. 2833-2838 - László Horváth, Imre J. Rudas:
Requested behavior driven control of product definition. 2839-2844 - Sebastian Rohjans, Sebastian Lehnhoff, Mathias Uslar, Plamen M. Rusinov:
SeMo-TS: Testing OPC UA server models in simulated environments. 2845-2850 - Marcosiris A. O. Pessoa, Fabrício Junqueira, Diolino J. Santos Filho, Newton Maruyama, Lucas A. Moscato, Paulo E. Miyagi:
Virtual Enterprise Planning System using time windows and capacity constraint concepts. 2851-2856 - Swagat Chopra, Venugopal Prasanth, Brahim El Mansouri, Pavol Bauer:
A contactless power transfer - Supercapacitor based system for EV application. 2860-2865 - Harish S. Krishnamoorthy, Pawan Garg, Prasad N. Enjeti:
A matrix converter-based topology for high power electric vehicle battery charging and V2G application. 2866-2871 - Dawei He, Pascal Ntsama, Jinchi Han, Thomas G. Habetler:
A novel isolated bidirectional DC-DC converter for ultra-capacitor application in hybrid and electric vehicles. 2872-2876 - Wilhelm Peters, Oliver Wallscheid, Joachim Böcker:
A precise open-loop torque control for an interior permanent magnet synchronous motor (IPMSM) considering iron losses. 2877-2882 - Harun Turker, Matthieu Hauck, Ahmad Hably, Seddik Bacha:
A tool of Vehicle-to-Grid (V2G) concept for voltage plan control of residential electric grid areas with Plug-in Hybrid Electric Vehicles (PHEVs). 2883-2888 - Saeid Haghbin, Maliheh Sadeghi Kani, David Vindel, Ola Carlson, Sonja Lundmark:
A trigonometric velocity estimator using a resolver sensor in drive system applications. 2889-2894 - Abhijit Choudhury, Pragasen Pillay, Sheldon S. Williamson:
Advanced drive for low cost permanent magnet synchronous machines used for HEV - a review. 2895-2900 - Martin Lévesque, Da Qian Xu, Géza Joós, Martin Maier:
Co-Simulation of PEV coordination schemes over a FiWi Smart Grid communications infrastructure. 2901-2906 - Jayakrishnan Harikumaran, Gyorgy Vereczki, Csaba Farkas, Pavol Bauer:
Comparison of quick charge technologies for electric vehicle introduction in Netherlands. 2907-2913 - Sean C. Smithson, Sheldon S. Williamson:
Constant power loads in More Electric Vehicles - an overview. 2914-2922 - Chih-Han Kuo, Chen-Wen Hsu, Chih-Wei Yu, Pau-Lo Hsu:
Control of induction machines on an electric vehicle with maximum torque and efficiency via the optimal slip factor. 2923-2928 - Lucian Nicolae Tutelea, Sorin Ioan Deaconu, Ion Boldea:
Design and FEM validation for an axial Single Stator Dual Rotor PMSM. 2929-2935 - Masashi Takeda, Naoki Motoi, Giuseppe Guidi, Yukinori Tsuruta, Atsuo Kawamura:
Driving range extension by series chopper power train of EV with optimized dc voltage profile. 2936-2941 - Harun Turker, Ahmad Hably, Seddik Bacha:
Dynamic programming for optimal integration of Plug-in Hybrid Electric Vehicles (PHEVs) in residential electric grid areas. 2942-2948 - Oskar Josefsson, Torbjörn Thiringer, Sonja Lundmark, Hector Zelaya:
Evaluation and comparison of a two-level and a multilevel inverter for an EV using a modulized battery topology. 2949-2956 - Adrian Florescu, Seddik Bacha, Iulian Munteanu, Antoneta I. Bratcu:
Frequency-separation-based energy management control strategy of power flows within electric vehicles using ultracapacitors. 2957-2964 - Abhijit Choudhury, Pragasen Pillay, Sheldon S. Williamson:
Modified stator flux estimation based direct torque controlled PMSM drive for hybrid electric vehicle. 2965-2970 - Nobuyoshi Mutoh, Ryutaro Miyaji, Toru Yamaguchi:
Outstanding running performance of front-and-rear-wheel-independent-drive-type electric vehicle (FRID EV) under various transient running conditions. 2971-2976 - Nilson Henao, Sousso Kelouwani, Kodjo Agbossou, Yves Dubé:
PEMFC low temperature startup for electric vehicle. 2977-2982 - Tetsuya Oribe, Taichi Kimura, Terukazu Sato, Kimihiro Nishijima, Takashi Nabeshima:
Power supply for idle reduction employing constant frequency ripple regulator. 2983-2988 - Philip Dost, Constantinos Sourkounis:
Study for using electric vehicles as energy supply within the electric grid. 2989-2993 - Moon-Young Kim, Chol-Ho Kim, Jun-Ho Kim, Duk-You Kim, Gun-Woo Moon:
Switched capacitor with chain structure for cell-balancing of lithium-ion batteries. 2994-2999 - Norma Anglani, Fabrizio Fattori, Giuseppe Muliere:
The impact of electric vehicles on the grid for local energy models. 3000-3006 - Thanh Hai Phung, Jean-Christophe Crebier, Yves Lembeye:
Voltage balancing converter network for series-connected battery stack. 3007-3013 - Gonçalo Martins, Dave Lacey, Allistair Moses, Matthew J. Rutherford, Kimon P. Valavanis:
A case for I/O response benchmarking of microprocessors. 3018-3023 - Bo Li, Xuefang Lin-Shi, Bruno Allard, Jean-Marie Retif:
An FPGA prototype of current and voltage predictive controller for high switching frequency buck converter. 3024-3029 - Supriya Kelkar, Raj Kamal:
Control area network based quotient remainder compression-algorithm for automotive applications. 3030-3036 - Cristina Guzman, Alben Cardenas, Kodjo Agbossou:
Control of voltage source inverter using FPGA implementation of ADALINE-FLL. 3037-3042 - Henrique Dezani, Luís Gomes, Furio Damiani, Norian Marranghello:
Controlling traffic jams on urban roads modeled in Coloured Petri net using Genetic Algorithm. 3043-3048 - Bastien Vincke, Abdelhafid Elouardi, Alain Lambert, Alain Mérigot:
Efficient implementation of EKF-SLAM on a multi-core embedded system. 3049-3054 - Nan Li, Xuefang Lin-Shi, Bruno Allard, Pierre Lefranc, Emmanuel Godoy, Ali Jaafar:
FPGA based predictive deadbeat control for high switching frequency SEPIC. 3055-3060 - Óscar Jiménez, Oscar Lucía, Isidoro Urriza, Luis Angel Barragan, José Ignacio Artigas, Denis Navarro:
FPGA-based 2nd-order sigma-delta A/D converter for current measurement for resonant power converters. 3061-3066 - Marwa Ben Saïd, Mohamed Wissem Naouar, Imen Bahri, Eric Monmasson, Meriem Merai, Meriam Douma, Ilhem Slama-Belkhodja:
Full system on programmable chip solution for DPC control of three phase PWM boost rectifier. 3067-3072 - Christian Dufour, Sébastien Cense, Tarek Ould-Bachir, Luc-André Grégoire, Jean Bélanger:
General-purpose reconfigurable low-latency electric circuit and motor drive solver on FPGA. 3073-3081 - Laila Cheikhi, Alain Abran, Jean-Marc Desharnais:
Analysis of the ISBSG software repository from the ISO 9126 view of software product quality. 3086-3094 - Mitra Nami, Witold Suryn:
Case study: Using requirements and finite state machine for evaluating software trustworthiness. 3095-3100 - Horacio Hoyos, Rubby Casallas, Fernando Jiménez:
Model-based framework for embedded system product line. 3101-3106 - Fabio Henrique de Assis, Fabio Kawaoka Takase, Newton Maruyama, Paulo Eigi Miyagi:
Developing an ROV software control architecture: A formal specification approach. 3107-3112 - Fazel Ansari, Randitya A. Dewa, Madjid Fathi:
Drive system assistance tool for meta-analysis of dimensioning and maintenance indicators. 3113-3119 - Dominique St-Louis, Witold Suryn:
Enhancing ISO/IEC 25021 quality measure elements for wider application within ISO 25000 series. 3120-3125 - Mitra Nami, Witold Suryn:
From requirements to software trustworthiness using scenarios and finite state machine. 3126-3131 - Carlos Monsalve, Alain April, Alain Abran:
On the expressiveness of business process modeling notations for software requirements elicitation. 3132-3137 - Witold Suryn:
Software quality engineering in service of IT consumer. 3138-3143 - Manar AbuTalib, Emilia Mendes, Adel Khelifi:
Towards reliable web applications: ISO 19761. 3144-3148 - Manar AbuTalib, Adel Khelifi, Tahsin Ugurlu:
Using ISO 27001 in teaching information security. 3149-3153 - Xian-Ming Zhang, Qing-Long Han:
A novel stability criterion for networked control systems using a new bounding technique. 3158-3163 - Yutaka Uchimura, Masanori Nagahara:
Controller design based on complete quadratic Lyapunov-Krasovskii functional for time delay systems. 3164-3169 - Koichi Kobayashi, Kunihiko Hiraishi:
Design of networked control systems using a stochastic switching systems approach. 3170-3175 - Eduardo Paciência Godoy, Fernando Scorzoni, Arthur José Vieira Porto:
Evaluating serial ZigBee devices for application in wireless networked control systems. 3176-3181 - Jonas Diemer, Jonas Rox, Rolf Ernst, Feng Chen, Karl-Theo Kremer, Kai Richter:
Exploring the worst-case timing of Ethernet AVB for industrial applications. 3182-3187 - Fuwen Yang, Qing-Long Han:
H∞ networked control with multiple packet dropouts. 3188-3193 - Dawei Zhang, Qing-Long Han, Xinchun Jia:
Network-based output tracking control of Van der Pol's oscillators. 3194-3199 - Koichi Kobayashi, Kunihiko Hiraishi:
Self-triggered model predictive control with delay compensation for networked control systems. 3200-3205 - Jia Wang, Qing-Long Han, Fuwen Yang:
Stability and passivity of feedback interconnected systems in network environments. 3206-3211 - Javier Ferrer-Coll, Per Ängskog, He Shabai, José Chilo, Peter F. Stenumgaard:
Analysis of wireless communications in underground tunnels for industrial use. 3216-3220 - Pascal Giard, Georges Kaddoum, François Gagnon, Claude Thibeault:
FPGA implementation and evaluation of discrete-time chaotic generators circuits. 3221-3224 - Jing Zhao, Dong Yang, Yajuan Qin, Tao Zheng, Junqi Duan, Mikael Gidlund:
Issues of routing protocol for Wireless Industrial Sensor Networks. 3225-3230 - Kan Yu, Mikael Gidlund, Johan Åkerberg, Mats Björkman:
Reliable RSS-based routing protocol for Industrial Wireless Sensor Networks. 3231-3237 - Remy Astier, Thierry Capitaine, Valery Bourny, Jérôme Dubois, Jérôme Fortin:
Technological leap of signal transfer system: CONTACTLESS. 3238-3243 - Song Han, Aloysius K. Mok, Mark Nixon, Deji Chen, Lawrence Waugh, Fred Stotz:
Utilizing parallelization and embedded multicore architectures for scheduling large-scale wireless mesh networks. 3244-3251 - Tomokazu Mishima, Chikanori Takami, Mutsuo Nakaoka:
A new ZVS phase-shifted high-frequency resonant inverter incorporating asymmetrical PWM-based unit control for induction heating. 3256-3261 - Fernando Sanz-Serrano, Carlos Franco, Carlos Sagüés, David Paesa, Sergio Llorente:
Flexible cooking zone with 2D mobile inductors in induction hobs. 3262-3267 - Hector Sarnago, Oscar Lucía, Arturo Mediano, José M. Burdio:
High-efficiency power converters for domestic induction heating applications. 3268-3273 - Ali Salih:
IGBT for high performance induction heating applications. 3274-3280 - Eduardo Imaz, Rafael Alonso, Carlos Heras, Enrique Carretero, Iñigo Salinas:
IR sensor for temperature measurement in domestic induction heating systems. 3281-3286 - Ignacio Lope, Claudio Carretero, Jesús Acero, José Miguel Burdio, Rafael Alonso:
PCB multi-track coils for domestic induction heating applications. 3287-3292 - Kien Long Nguyen, Stéphane Caux, Xavier Kestelyn, Olivier Pateau, Pascal Maussion:
Resonant control of multi-phase induction heating systems. 3293-3298 - Takayuki Hirokawa, Eiji Hiraki, Toshihiko Tanaka, Masayuki Okamoto, Mutsuo Nakaoka:
The practical evaluations of time-sharing high-frequency resonant soft-switching inverter for all metal IH cooking appliances. 3302-3307 - Kyle D. Anderson, Mario E. Berges, Adrian Ocneanu, Diego S. Benítez, José M. F. Moura:
Event detection for Non Intrusive load monitoring. 3312-3317 - Herie Park, Marie Ruellan, Nadia Martaj, Rachid Bennacer, Eric Monmasson:
Generic thermal model of electric appliances integrated in low energy building. 3318-3323 - Thomas Bier, Djaffar Ould Abdeslam, Jean Mercklé, Dirk Benyoucef:
Smart meter systems detection & classification using artificial neural networks. 3324-3329 - Lei Tang, Wei Xu, Chengbi Zeng, David George Dorrell, Xinghuo Yu:
A linear-prediction maximum power point tracking algorithm for photovoltaic power generation. 3334-3339 - Mohamed Haddad, Salem Rahmani, Farhat Fnaiech, Kamal Al-Haddad:
A Lyapunov-based current control strategy of three phase Shunt Active Power Filter for harmonic elimination, power-factor correction, and load unbalance compensation. 3340-3345 - Lingling Cao, Ka Hong Loo, William Y. M. Lai, Chi K. Tse, Yugang Yang:
A multi-input bi-directional converter with decoupled power distribution control. 3346-3351 - Zihu Zhou, Hongfei Wu, Xudong Ma, Yan Xing:
A non-isolated three-port converter for stand-alone renewable power system. 3352-3357 - Souvik Dasgupta, Irudhayasamy Vasantharaj Prasanna, Sanjib Kumar Sahoo, Sanjib Kumar Panda:
A novel four-leg three-phase inverter control strategy to reduce the data center thermal losses: Elimination of neutral current. 3358-3363 - Bjarte Hoff, Waldemar Sulkowski:
A simple DC-link pre-charging method for three-phase voltage source inverters. 3364-3367 - Fei Luo, William Y. M. Lai, Chi K. Tse, Ka Hong Loo:
A triple-droop control scheme for inverter-based microgrids. 3368-3375 - Deepak Gautam, Ashoka K. S. Bhat:
An integrated boost-dual half-bridge LCL SRC with capacitive output filter for electrolyser application. 3376-3381 - Udupi R. Prasanna, Akshay K. Rathore:
Analysis and design of interleaved current-fed phase-modulated single-phase unfolding inverter. 3382-3387 - Shahil Shah, Parthasarathi Sensarma:
Auto-synchronization of LC filter based front-end converter with parallel inverters based weak distorted island grid using voltage injection. 3388-3393 - Baburaj Karanayil, Marcos Garcia Arregui, Vassilios G. Agelidis, Mihai Ciobotaru:
Bi-directional isolated multi-port power converter for aircraft HVDC network power transfer. 3394-3399 - Aitor Etxeberria, Ionel Vechiu, Sylvain Baudoin, Haritza Camblong, Jean-Michel Vinassa:
Control of a hybrid Energy Storage System using a three level neutral point clamped converter. 3400-3405 - Gerardo Escobar, Sami Pettersson, Carl Ngai Man Ho:
Control of single-phase inverter connected to the grid through an LCL filter. 3406-3411 - Hisham Mahmood, Dennis Michaelson, Jin Jiang:
Control strategy for a standalone PV/battery hybrid system. 3412-3418 - Jinwei He, Yunwei Li:
Generalized microgrid harmonic compensation strategies using DG unit interfacing converters. 3419-3424 - Lakshmi GopiReddy, Leon M. Tolbert, Burak Ozpineci:
Lifetime prediction of IGBT in a STATCOM using modified-graphical rainflow counting algorithm. 3425-3430 - Xuewei Pan, Udupi R. Prasanna, Akshay K. Rathore:
Magnetizing inductance assisted wide range ZVS three-phase AC link current-fed Dc/Dc converter with active-clamp for low DC voltage applications. 3431-3436 - Alka Singh, Bhim Singh:
Modeling and control of grid connected voltage source converter for power sharing. 3437-3442 - Marcelo A. Pérez, Ricardo Lizana, Camilo Azocar, José Rodríguez, Bin Wu:
Modular multilevel cascaded converter based on current source H-bridges cells. 3443-3448 - Arkadiusz Kaszewski, Lech Marian Grzesiak, Bartlomiej Ufnalski:
Multi-oscillatory LQR for a three-phase four-wire inverter with L3nC output filter. 3449-3455 - Amin Hasanzadeh, Chris S. Edrington, Jesse Leonard:
Optimal linear controller design of standalone VSI including emulated output current state. 3456-3461 - Antonio Camacho, Miguel Castilla, Jaume Miret, José Matas, Eduardo Alarcon-Gallo, Luis García de Vicuña, Pau Martí:
Reactive power control for voltage support during type C voltage-sags. 3462-3467 - Ayedh H. Alqahtani, Vadim I. Utkin:
Self-optimization of photovoltaic system power generation based on sliding mode control. 3468-3474 - Ahmed G. Abo-Khalil, Hammad Abo-Zied:
Sensorless control for DFIG wind turbines based on support vector regression. 3475-3480 - Bjarte Hoff, Waldemar Sulkowski:
Sensorless control with startup procedure and grid fault detection for three-phase VSI with LCL filter. 3481-3486 - Diones V. Dutra, Fabio C. Posser, Celso B. Tischer, Lucas G. Scherer, Claiton M. Franchi, Robinson F. de Camargo:
Supervisory and control system development applied to distributed generation using Web tools. 3494-3499 - Nayeem A. Ninad, Luiz A. C. Lopes:
Unbalanced operation of per-phase vector controlled four-leg grid forming inverter for stand-alone hybrid systems. 3500-3505 - Amir Hossein Rajaei, Mustafa Mohamadian, Ali Yazdian:
A new high frequency grid interface system for PMSG-based wind turbine generators in low power applications. 3510-3515 - Lucheng Hong, Qirong Jiang, Liang Wang, Wei Du:
A new topology and control strategy for centralized ride-through capability of wind farm. 3516-3520 - Ming-Fa Tsai, Chung-Shi Tseng, Yu-Hsiang Hung:
A novel MPPT control design for wind-turbine generation systems using neural network compensator. 3521-3526 - Ngoc-Tung Nguyen, Hong-Hee Lee:
An effective harmonic elimination for DFIG feeding non-linear loads in stand-alone operation. 3527-3532 - Zhong Zheng, Geng Yang, Hua Geng:
Capability of asymmetrical grid faults ride-through for DFIG-based Wind turbines. 3533-3540 - Hang Seng Che, Mario J. Durán, Wooi Ping Hew, Nasrudin Abd. Rahim, Emil Levi, Martin Jones:
Dc-link voltage balancing of six-phase wind energy systems with series-connected machineside converters and NPC grid-side converter. 3541-3546 - Lirong Zhang, Yi Wang, Heming Li, Pin Sun:
Hierarchical coordinated control of DC microgrid with wind turbines. 3547-3552 - Xibo Yuan:
Low voltage ride through control of a cascaded high power converter for direct-drive permanent magnet wind generators. 3553-3559 - Bachir Kedjar, Kamal Al-Haddad:
Optimal control of a grid connected variable speed wind energy conversion system based on squirrel cage induction generator. 3560-3565 - Guillermo R. Catuogno, Daniel G. Forchetti, G. Garcia, Roberto Leidhold:
Power flow control with losses minimization and fault tolerance for PMSG. 3566-3571 - Ángeles Rodríguez-Serrano, Antonio Jesús Torralba Silgado, Alberto Villafane Perez, Eloisa Martin Ramos:
Communication interfaces for the EV service provider of the smart grid. 3576-3581 - Edmund Widl, Peter Palensky, Atiyah Elsheikh:
Evaluation of two approaches for simulating cyber-physical energy systems. 3582-3587 - Daichi Kawashima, Masaru Ihara, Tianmeng Shen, Hiroaki Nishi:
Real-time simulation of cooperative demand control method with batteries. 3588-3593 - Ryogo Kubo, Tianmeng Shen, Toshiro Togoshi, Koichi Inoue, Hiroaki Nishi, Masashi Tadokoro, Ken-Ichi Suzuki, Naoto Yoshimoto:
Service-oriented communication platform for scalable smart community applications. 3594-3599 - Maruti Sinha, Bhumin Desai, Robert Cox:
Using smart meters for diagnostics and model-based control in thermal comfort systems. 3600-3605 - Li Lu, Bassel Aslan, Luc Kobylanski, Paul Sandulescu, Fabien Meinguet, Xavier Kestelyn, Eric Semail:
Computation of optimal current references for flux-weakening of multi-phase synchronous machines. 3610-3615 - José A. Riveros, Mario J. Durán, Federico Barrero, Sergio Toral:
Direct torque control for five-phase induction motor drives with reduced common-mode voltage. 3616-3621 - Jano Malvar, Alejandro G. Yepes, Ana Vidal, Pablo Fernandez-Comesana, Francisco D. Freijedo, Óscar Lopez, Jesús Doval-Gandoy:
Harmonic subspace and sequence mapping in a series-connected six-phase two-motor drive. 3622-3627 - Radu Bojoi, Andrea Cavagnino, Alberto Tenconi, Silvio Vaschetto:
Multiphase PM machine for More Electric Aircraft applications: Prototype for design validation. 3628-3634 - Óscar Lopez, Jacobo Álvarez, Jano Malvar, Alejandro G. Yepes, Ana Vidal, Pablo Fernandez-Comesana, Francisco D. Freijedo, Jesús Doval-Gandoy:
Multiphase space vector control modulation technique for voltage source converters. 3635-3640 - Nandor Bodo, Martin Jones, Emil Levi:
PWM techniques for an open-end winding fivephase drive with a single DC source supply. 3641-3646 - Hugo Guzman, Mario J. Durán, Federico Barrero:
Speed control of five-phase induction motor drives with an open phase fault condition and predictive current control methods. 3647-3652 - Raúl Gregor, Jorge Rodas:
Speed sensorless control of dual three-phase induction machine based on a luenberger observer for rotor current estimation. 3653-3658 - Amrit Gautam, Joesph O. Ojo:
Variable speed multiphase induction machine using pole phase modulation principle. 3659-3665 - Mihai Comanescu:
A family of sensorless observers with speed estimate for rotor position estimation of IM and PMSM drives. 3670-3675 - Jui-Ling Chen, Tian-Hua Liu:
An IPMSM position control system using high frequency injection sensorless technique. 3676-3681 - Fabien Gabriel, Frederik De Belie, Xavier Neyt:
Inductance-based position self-sensing of a brushless DC-machine using high-frequency signal injection. 3682-3687 - Jorge Lara, Ambrish Chandra, Jianhong Xu:
Integration of HFSI and extended-EMF based techniques for PMSM sensorless control in HEV/EV applications. 3688-3693 - Mihai Comanescu:
Integration of observer equations used in AC motor drives by zero and First Order Hold discretization. 3694-3698 - Abdelrahaman Yousif Eshag Lesan, Mamadou Lamine Doumbia, Pierre Sicard:
Methodology and experimental set-up for DSP-based sensorless PWM speed estimation of induction machine. 3699-3704 - Jui-Ling Chen, Tian-Hua Liu:
Predictive controller design for a sensorless IPMSM speed control system. 3705-3710 - Noor Aamir Baloch, Kentaro Inomata, Shinya Morimoto, Kozo Ide, Kazuhiro Tsuruta:
Sliding mode compensator for improving robustness of phase locked loop for encoderless servo drive. 3711-3716 - Filip Andren, Thomas I. Strasser, Alois Zoitl, Ingo Hegny:
A reconfigurable communication gateway for distributed embedded control systems. 3720-3726 - Reinhard Hametner, Dietmar Winkler, Alois Zoitl:
Agile testing concepts based on keyword-driven testing for industrial automation systems. 3727-3732 - Quoc-Bao Duong, Eric Zamaï, Khoi-Quoc Tran-Dinh:
Confidence estimation of feedback information using dynamic bayesian networks. 3733-3738 - Luis E. Gonzalez Moctezuma, Andrei Lobov, Jose L. Martinez Lastra:
Free shape paths in industrial robots. 3739-3743 - Monika Wenger, Alois Zoitl:
IEC 61131-3 model for model-driven development. 3744-3749 - Thomas I. Strasser, Filip Andren, Valeriy Vyatkin, Gulnara Zhabelova, Chen-Wei Yang:
Towards an IEC 61499 compliance profile for smart grids review and analysis of possibilities. 3750-3757 - Hussain S. Athab, Amir Yazdani, Bin Wu, Dylan Dah-Chuan Lu:
A single-switch single-stage quasi-active PFC converter with bus voltage following peak input voltage. 3762-3767 - Jan Michalik, Ján Molnár, Zdenek Peroutka:
Active suppression of current harmonics on single-phase current-source active rectifier AC side: Proposed approches and their evaluation. 3768-3773 - Hadi Youssef Kanaan, Maxime Caron, Kamal Al-Haddad:
Design, modeling, control and simulation of a two-stage grid-connected power load emulator. 3774-3779 - Ki Chun Ng, Liuping Wang:
Input-output linearization and PI control for a three-phase neutral point clamped boost rectifier. 3780-3785 - Dorin O. Neacsu:
Principle of a novel component minimized active power filter for high-power magnet supplies. 3786-3791 - Sota Shimizu, Motosuke Kiyohara, Takumi Hashizume:
Development of micro wide angle fovea lens. 3796-3801 - Hao Guo, Yuzo Ohta, Izumi Masubuchi:
Gain scheduled reference governor and its application to long seek control of hard disk drives. 3802-3807 - Manuel Nandayapa, Chowarit Mitsantisuk, Kiyoshi Ohishi:
High resolution position estimation for advanced motion control based on FPGA. 3808-3813 - Kenta Seki, Hiroki Yokoi, Makoto Iwasaki:
Improvement of vibration suppression performance of galvano mirror using piezoelectric element. 3814-3819 - Takashi Yoshioka, Naoki Shimada, Kiyoshi Ohishi, Toshimasa Miyazaki:
Load-side acceleration control for industrial robot arm with axial torsion. 3820-3825 - Hongzhong Zhu, Hiroshi Fujimoto:
Overcoming current quantization effects for precise current control by combining dithering techniques and kalman filter. 3826-3831 - Kwanghyun Cho, Heeram Park, Seibum Choi, Sehoon Oh:
Precision motion control based on a periodic adaptive disturbance observer. 3832-3837 - Hidetoshi Ikeda, Hiroshi Sugie:
Robust control method for industrial servo systems based on approximation of fractional order integral. 3838-3843 - Andrew Kadik, Wilson Wang:
A smart monitor for measurement and fault detection. 3848-3853 - Miguel Delgado, Giansalvo Cirrincione, Antoni García, Juan Antonio Ortega, Humberto Henao:
Accurate bearing faults classification based on statistical-time features, curvilinear component analysis and neural networks. 3854-3861 - Antoine Picot, Ziad Obeid, Jérémi Régnier, Pascal Maussion, Sylvain Poignant, Olivier Darnis:
Bearing fault detection in synchronous machine based on the statistical analysis of stator current. 3862-3867 - Mourad Lamraoui, Marc Thomas, Mohamed El Badaoui, François Girardin:
Cyclostationarity analysis of instantaneous angular speeds for monitoring chatter in high speed milling. 3868-3873 - Shen Yin, Zuolong Wei, Huijun Gao, Kaixiang Peng:
Data-driven quality related prediction and monitoring. 3874-3879 - Luana Batista, Bechir Badri, Robert Sabourin, Marc Thomas:
Detecting bearing defects under high noise levels: A classifier fusion approach. 3880-3886 - Goran Stojcic, Robert Magnet, Gojko Joksimovic, Mario Vasak, Nedjeljko Peric, Thomas M. Wolbank:
Detecting partially fallen-out magnetic slot wedges in AC machines based on electrical quantities only. 3887-3892 - Joan Pons-Llinares, Vicente Climente-Alarcon, Francisco Vedreno-Santos, Jose A. Antonino-Daviu, Martin Riera-Guasp:
Electric machines diagnosis techniques via transient current analysis. 3893-3900 - Ziad Obeid, Antoine Picot, Sylvain Poignant, Jérémi Régnier, Olivier Darnis, Pascal Maussion:
Experimental comparison between diagnostic indicators for bearing fault detection in synchronous machine by spectral Kurtosis and energy analysis. 3901-3906 - Jinane Harmouche, Claude Delpha, Demba Diallo:
Faults diagnosis and detection using principal component analysis and Kullback-Leibler divergence. 3907-3912 - El Houssin El Bouchikhi, Vincent Choqueuse, Mohamed Benbouzid, Jean Frédéric Charpentier:
Induction machine fault detection enhancement using a stator current high resolution spectrum. 3913-3918 - Hassen Keskes, Ahmed Braham, Zied Lachiri:
On the use of stationary wavelet packet transform and multiclass wavelet SVM for broken rotor bar detection. 3919-3924 - Garance Vinson, Michel Combacau, Thomas Prado, Pauline Ribot:
Permanent magnets synchronous machines faults detection and identification. 3925-3930 - Claude Delpha, Hao Chen, Demba Diallo:
SVM based diagnosis of inverter fed induction machine drive: A new challenge. 3931-3936 - Yassine Amirat, Vincent Choqueuse, Mohamed Benbouzid:
Wind turbine bearing failure detection using generator stator current homopolar component ensemble empirical mode decomposition. 3937-3942 - So-Ra Chung, Eihab M. Abdel-Rahman, John T. W. Yeow:
A MEMS Analog demodulator. 3946-3951 - Lei Shi, Stoyan N. Nihtianov, Frank Scholze, Lis K. Nanver:
Electrical performance stability characterization of high-sensitivity Si-based EUV photodiodes in a harsh industrial application. 3952-3957 - Stefan Gassmann, Lienhard Pagel, Antonio Luque, Francisco Perdigones, Carmen Aracil:
Fabrication of electroosmotic micropump using PCB and SU-8. 3958-3961 - Bahareh Yaghootkar, Mahmoud Amouzgar, Mojtaba Kahrizi:
Fabrication of silicon micro-rod array with controlled density and size distribution using porous silicon. 3962-3965 - Jie Mei, Lijie Li, Steve Wilks:
Impact on the electrostatic field of electrostatic force microscope due to tip-sample distance and non-flat sample surface. 3966-3969 - Khaled M. Al-Aribe, George K. Knopf, Amarjeet S. Bassi:
Light-driven hydrogel microvalve based on BR proton pumps. 3970-3975 - Sangtak Park, Manu Pallapa, John T. W. Yeow, Eihab M. Abdel-Rahman:
Low voltage electrostatic actuation and angular displacement measurement of micromirror coupled with resonant drive circuit. 3976-3981 - Stefan Gassmann, Holger Gotze, Matthias Hinze, Maren Mix, Gerd-Uwe Flechsig, Lienhard Pagel:
PCB based DNA detection chip. 3982-3986 - Imran Khan, James Chong, Ridha Ben Mrad, Siyuan He, Michael J. Schertzer:
Performance of an electrostatic actuated micromirror in a vacuum and non-vacuum packaging. 3987-3990 - Firas Sammoura, Katherine Smyth, Sang-Gook Kim:
Working equations of a circular multimorph piezoelectric micromachined ultrasonic transducer. 3991-3996 - Svetlana Spitsina, Mojtaba Kahrizi:
ZnO crystalline nanowires array for application in gas ionization sensor. 3997-4002 - Joao Marcus Abreu Curti, Xiaoliang Huang, Ryo Minaki, Yoichi Hori:
A simplified power management strategy for a supercapacitor/battery Hybrid Energy Storage System using the Half-Controlled Converter. 4006-4011 - Habiballah Rahimi-Eichi, Mo-Yuen Chow:
Adaptive parameter identification and State-of-Charge estimation of lithium-ion batteries. 4012-4017 - Rocco Restaino, Walter Zamboni:
Comparing particle filter and extended kalman filter for battery State-Of-Charge estimation. 4018-4023 - Branislav Hredzak, Vassilios G. Agelidis:
Direct current control of a battery-ultracapacitor power supply. 4024-4028 - François Ruelland, Kamal Al-Haddad:
Factors for an LRV voltage booster simulation. 4029-4034 - Zhibin Zhou, Franck Scuiller, Jean Frédéric Charpentier, Mohamed Benbouzid, Tianhao Tang:
Grid-connected marine current generation system power smoothing control using supercapacitors. 4035-4040 - Federico Baronti, Gabriele Fantechi, Roberto Roncella, Roberto Saletti, Pierangelo Terreni:
Hardware building blocks of a hierarchical battery management system for a fuel cell HEV. 4041-4047 - Maawad Makdessi, Ali Sari, Pascal Venet:
Modeling of metallized polymer films capacitor's impedance. 4048-4053 - Franck Scuiller:
Study of a supercapacitor Energy Storage System designed to reduce frequency modulation on shipboard electric power system. 4054-4059 - Jukkrit Noppakunkajorn, Omar Baroudi, Robert W. Cox, Lalit P. Mandal:
Using transient electrical measurements for real-time monitoring of battery state-of-charge and state-of-health. 4060-4065 - M. Reza Dehbozorgi, Hossein Madadi Kojabadi, Hani Vahedi, Kamal Al-Haddad:
A comparative study of various MRAS-based IM's rotor resistance adaptation methods. 4070-4075 - Wenlong Li, Christopher H. T. Lee, Chunhua Liu:
A dual-memory permanent magnet brushless machine for automotive integrated starter-generator application. 4076-4081 - Mei Kang, Jinghua Ji, Guohai Liu, Wenxiang Zhao:
A new tubular fault-tolerant permanent-magnet motor for active vehicle suspension. 4082-4086 - Zhen Zhang, Tze Wood Ching, Chunhua Liu, Christopher H. T. Lee:
Comparison of chaotic PWM algorithms for electric vehicle motor drives. 4087-4092 - Qian Chen, Guohai Liu, Junqin Yang, Wensheng Gong, Wenxiang Zhao:
Comparison Of Two Interior Permanent-Magnet Motors With Improved Fault-Tolerance. 4093-4098 - Milind Paradkar, Joachim Böcker:
Design of a high performance ferrite magnet-assisted synchronous reluctance motor for an electric vehicle. 4099-4103 - Ying Fan, Jin Huang, Xuedong Han, Xiaofan Fu, Hua Wei:
Design, analysis and sensorless control of a new self-decelerating permanent-magnet motor. 4104-4109 - Xiaoyong Zhu, Lingting Kong, Long Chen, Wenxiang Zhao, Li Quan, Ming Cheng:
Electromagnetic performances analysis of a new magnetic-planetary-geared permanent magnet brushless machine for hybrid electric vehicles. 4110-4114 - Poria Fajri, Reza Ahmadi, Mehdi Ferdowsi:
Equivalent vehicle rotational inertia used for electric vehicle test bench dynamic studies. 4115-4120 - Carlos Montero, Alejandro Oliva, David Marcos, Elena González, Carlos Bordons, Miguel A. Ridao, Eduardo F. Camacho, E. López:
Fuel cell and power control for a hybrid vehicle. Experimental results. 4121-4126 - J. F. Ramahaleomiarantsoa, Nicolas Héraud, Ouadie Bennouna, Eric Jean Roy Sambatra, J. M. Razafimahenina:
Modeling & fault diagnosis system for electric vehicles. 4127-4132 - Wei Xu, Wenwu Yang, Xinghuo Yu, Jinwei He:
One new model based predictive torque control algorithm for doubly salient permanent magnet synchronous machines. 4133-4138 - Yilian Zhang, Wei Hua, Ming Cheng, Gan Zhang, Xiaofan Fu:
Static characteristic of a novel stator surface-mounted permanent magnet machine for brushless DC drives. 4139-4144 - Sachiko Nakagawa, Noboru Igarashi, Yosuke Tsuchiya, Masahiko Narita, Yuka Kato:
An implementation of a distributed service framework for cloud-based robot services. 4148-4153 - Daisuke Chugo, Kei Hirose, Katsuki Nakashima, Sho Yokota, Hiroyuki Kobayashi, Hiroshi Hashimoto:
Camera-based navigation for service robots using pictographs on the crossing point. 4154-4159 - Akio Gofuku, Shinya Ishibashi:
Effect of usage of visualized eye fixation points of skilled operators on education of plant operation. 4160-4164 - Shiro Matsunaga, Satoshi Suzuki:
Human assistive control on tele-operated human-robot cooperative carrying task. 4165-4170 - Andrey Vavilin, Kang-Hyun Jo:
Moving object detection and camera motion analysis from moving camera. 4171-4176 - Yoshinori Kobayashi, Ryota Suzuki, Yoshinori Kuno:
Robotic wheelchair with omni-directional vision for moving alongside a caregiver. 4177-4182 - Jun Goto, Satoshi Suzuki:
Simultaneous design of robot motion and utterance timing by using Self-Organizing Maps. 4183-4186 - Sho Yokota, Hiroshi Hashimoto, Daisuke Chugo, Kuniaki Kawabata:
Study on motion design for service robot based on standard human motion. 4187-4192 - Dazhuang He, Andrei Lobov, Luis E. Gonzalez Moctezuma, Jose L. Martinez Lastra:
An approach to use PERA in Enterprise Modeling for industrial systems. 4196-4203 - Larisa Dunai, Beatriz Defez García, Ismael Lengua, Guillermo Peris-Fajarnés:
3D CMOS sensor based acoustic object detection and navigation system for blind people. 4208-4215 - Van-Dung Hoang, Andrey Vavilin, Kang-Hyun Jo:
Fast human detection based on parallelogram haar-like features. 4220-4225 - Friedrich Gelbard, Dietmar Bruckner:
Influence of psychoanalytic defense mechanisms on the decision making process in autonomous agents. 4226-4231 - Chi-Min Oh, Yong-Cheol Lee, Dae-Young Kim, Chil-Woo Lee:
Moving object detection in omnidirectional vision-based mobile robot. 4232-4235 - My-Ha Le, Andrey Vavilin, Kang-Hyun Jo:
Removing outliers of large scale scene models based on automatic context analysis and convex optimization. 4236-4241 - Majid Pahlevaninezhad, Djilali Hamza, Amish Servansing, Alireza R. Bakhshai, Praveen K. Jain:
An integrated EMI suppression Y-caps applicable to high frequency planar transformers in high power DC-DC converters used for electric vehicle. 4246-4251 - Samantha Lacroix, Mickaël Hilairet, Eric Labouré:
Design of an integrated fast battery charger controller on a FPGA board. 4252-4257 - Mai Tuan Dat, Yonghua Cheng, Johan Driesen:
Fault-tolerant operation of power converters in PHEVs coupled by a Scott transformer. 4258-4263 - Hiroshi Fujimoto, Sho Egami, Jun Saito, Kazunori Handa:
Range extension control system for electric vehicle based on searching algorithm of optimal front and rear driving force distribution. 4264-4269 - Roman Bosshard, Jonas Mühlethaler, Johann W. Kolar, Ivica Stevanovic:
The η-α-Pareto front of inductive power transfer coils. 4270-4277 - Yafei Wang, Binh Minh Nguyen, Hiroshi Fujimoto, Yoichi Hori:
Vision based multi-rate estimation and control of body slip angle for electric vehicles. 4278-4283 - Mohamed Benbouzid, Brice Beltran, Herve Mangel, Abdeslam Mamoune:
A high-order sliding mode observer for sensorless control of DFIG-based wind turbines. 4288-4292 - Jogendra Singh Thongam, Mohamed Tarbouchi, Rachid Beguenane, Aime Francis Okou, Adel Merabet, Pierre Bouchard:
An optimum speed MPPT controller for variable speed PMSG wind energy conversion systems. 4293-4297 - Abdelrahaman Yousif Eshag Lesan, Mamadou Lamine Doumbia, Pierre Sicard:
Comparative study of speed estimation techniques for sensorless vector control of induction machine. 4298-4303 - Tommy A. Theubou, René Wamkeue, Innocent Kamwa:
Control of grid-side inverter for isolated wind-diesel power plants using variable speed squirrel cage induction generator. 4304-4309 - Mohamed Becherif, Assia Henni, Mohamed Benbouzid, Maxime Wack:
Impedance spectroscopy failure diagnosis of a DFIG-based wind turbine. 4310-4315 - Adel Merabet, Vigneshwaran Rajasekaran, John Kerr:
Modelling and control of a pitch controlled wind turbine experiment workstation. 4316-4320 - Francisco Kleber de Araujo Lima, Joacillo Luz Dantas, Carlos Gustavo C. Branco:
Reactive power control of DFIG-based wind turbine during voltage sag. 4321-4325 - Tommy A. Theubou, René Wamkeue, Innocent Kamwa:
Reactive power management modeling of an autonomous Wind-Diesel Power plant. 4326-4331 - Olivo Ciccarelli, Maria Letizia Corradini, Giacomo Cucchieri, Gianluca Ippoliti, Giuseppe Orlando:
Sliding mode control based robust observer of aerodynamic torque for variable-speed wind turbines. 4332-4337 - Luis Ribeiro, Andre Rocha, José Barata:
A product handling technical architecture for multiagent-based mechatronic systems. 4342-4347 - Paulo Leitão, Nelson Rodrigues, Claudio Turrin, Arnaldo Pagani, Pierluigi Petrali:
GRACE ontology inteGrating pRocess and quAlity Control. 4348-4353 - Lorenzo Stroppa, Nelson Rodrigues, Paulo Leitão, Nicola Paone:
Quality control agents for adaptive visual inspection in production lines. 4354-4359 - Alessandro Bastari, Matteo Piersantelli, Cristina Cristalli, Nicola Paone:
Self-adapting test-plans in production line: An application to vision control stations. 4360-4365 - Pedro Ferreira, Niels Lohse, Margarita Razgon, Piero Larizza, Giuseppe Triggiani:
Skill based configuration methodology for evolvable mechatronic systems. 4366-4371 - João Ferreira, Luis Ribeiro, Pedro Neves, Hakan Akillioglu, Mauro Onori, José Barata:
Visualization tool to support multi-agent mechatronic based systems. 4372-4377 - Takahiro Mizoguchi, Takahiro Nozaki, Kouhei Ohnishi:
A design method of bilateral control system based on interactive parameters. 4382-4387 - Yuki Nagatsu, Seiichiro Katsura:
Bilateral control considering transition of subsystems based on ability to oppose the thumb. 4388-4393 - Kento Watanabe, Keita Shimamoto, Kouhei Ohnishi:
Bilateral control with 2-DOF haptic spherical interface. 4394-4399 - Nozomi Suzuki, Seiichiro Katsura:
Error correction for wireless haptic communication. 4400-4405 - Thao Tran Phuong, Manuel Nandayapa, Chowarit Mitsantisuk, Yuki Yokokura, Kiyoshi Ohishi:
Force sensation improvement in bilateral control of different master-slave mechanism based on high-order disturbance observer. 4406-4411 - Hiroki Nagashima, Seiichiro Katsura:
Function estimation of grasping/manipulating motions in scaled bilateral control using principal component analysis. 4412-4417 - Yosuke Mizutani, Seiichiro Katsura:
Modeling method based on wave equation for reproduction control of haptic sensation. 4418-4423 - Chowarit Mitsantisuk, Manuel Nandayapa, Kiyoshi Ohishi, Seiichiro Katsura:
Parameter estimation of flexible robot using multi-encoder based on disturbance observer. 4424-4429 - Yuki Yokokura, Kiyoshi Ohishi:
Reproducibility analysis and experimental validation of motion-copying system. 4430-4435 - Kayoung Kim, Kanghyun Nam, Sehoon Oh, Hiroshi Fujimoto, Yoichi Hori:
Two-dimensional assist control for power-assisted wheelchair considering straight and rotational motion decomposition. 4436-4441 - Bulent Vural, Chris S. Edrington:
A novel inductive-capacitive pulse forming circuit for pulse power load applications. 4446-4450 - Ali Bechouche, Hamid Sediki, Djaffar Ould Abdeslam, Salah Haddad:
An adaptive neural PLL for grid synchronization. 4451-4456 - Zhong Chen, Miao Chen:
Optimal control strategy of the interleaved buck cell based shunt active filter. 4457-4462 - Ana Rodríguez, Miguel Moranchel, Emilio José Bueno, Francisco J. Rodríguez:
Tuning of resonant controllers applied to the current control of Voltage-Source Converters. 4463-4468 - Flah Aymen, Lassaâd Sbita:
A new adaptive high speed control algorithm used for a FOC or a DTC PMSM drive strategies. 4472-4476 - Thomas Baumgartner, Ralph M. Burkart, Johann W. Kolar:
Analysis and design of an ultra-high-speed slotless self-bearing permanent-magnet motor. 4477-4483 - Jan Chysky, Jaroslav Novak, Martin Novak:
Control of high-speed permanent magnet synchronous machine. 4484-4488 - Farhat Mayssa, Flah Aymen, Lassaâd Sbita:
Influence of photovoltaic DC bus voltage on the high speed PMSM drive. 4489-4494 - Jianwen Shao, Thomas Stamm:
A low cost high power factor primary regulated offline LED driver. 4498-4502 - John C. W. Lam, Praveen K. Jain:
A simple single switch electronic ballast for compact fluorescent lamps with passive power factor correction (PFC) and soft switching capability. 4503-4508 - Guilherme Marcio Soares, Pedro S. Almeida, Danilo P. Pinto, Henrique A. C. Braga:
A single-stage high efficiency long-life off-line LED driver based on the DCM Cuk converter. 4509-4514 - Rafael A. Pinto, Priscila E. Bolzan, Ricardo N. do Prado:
A single-stage high power-factor converter for street lighting system based on LEDs supplied by mains/battery. 4515-4520 - Vitor Cristiano Bender, Fernanda B. Mendes, Norton D. Barth, William Dotto Vizzotto, Marco A. Dalla Costa, Ricardo N. do Prado, Tiago B. Marchesan:
An optimized methodology for led lighting system designers: A photometric analysis. 4521-4526 - Juliano P. de Lopes, Maikel Fernando Menke, Fabio Ecke Bisogno, Ricardo N. do Prado, Javier Ribas, J. Marcos Alonso, Alysson R. Seidel:
Automatic lamp detection technique for self-oscillating fluorescent lamp electronic ballasts. 4527-4532 - Szymon Beczkowski, Stig Munk-Nielsen:
Current-voltage model of LED light sources. 4533-4538 - Ka Hong Loo, William Y. M. Lai, Chi K. Tse:
Design considerations of a half-bridge LCC inverter with current balancing for AC-LED. 4539-4544 - Vitor Cristiano Bender, Alexandre S. Cardoso, Guilherme C. Flores, Cassiano Rech, Tiago B. Marchesan:
Electrothermal feedback of a LED lighting system: Modeling and control. 4545-4550 - Pedro S. Almeida, Guilherme Marcio Soares, Danilo P. Pinto, Henrique A. C. Braga:
Integrated SEPIC buck-boost converter as an off-line LED driver without electrolytic capacitors. 4551-4556 - Hugo M. Matoso, Lenin Martins Ferreira Morais, Porfírio C. Cortizo, Pedro Francisco Donoso-Garcia:
Intelligent power LED lighting system with wireless communication. 4557-4562 - Jorge García, Douglas Camponogara, Marco A. Dalla Costa, David Gacio, J. Marcos Alonso, Alexandre Campos:
LED driver with bidirectional series converter for low frequency ripple cancelation. 4563-4568 - Jacson Hansen, Diogo Ribeiro Vargas, André Luís Kirsten, Marco A. Dalla Costa, Alexandre Campos, Tiago B. Marchesan, Ricardo N. do Prado:
Modeling and control of an electronic ballast based on differential connection of Flyback converters. 4569-4574 - Douglas Camponogara, Diogo Ribeiro Vargas, Alexandre Campos, Marco A. Dalla Costa, Jorge García, J. Marcos Alonso:
Modelling and control of an optimized cascade structure for LED street lighting fixtures. 4575-4580 - Douglas Camponogara, Diogo Ribeiro Vargas, Alexandre Campos, Marco A. Dalla Costa, Fabio A. Berlitz, Jorge García, J. Marcos Alonso:
Optimized cascade structure applied to LED street lighting. 4581-4585 - Pedro S. Almeida, Joao M. Jorge, Daniel Botelho, Danilo P. Pinto, Henrique A. C. Braga:
Proposal of a low-cost LED driver for a multistring street lighting luminaire. 4586-4590 - Christian Brañas, Francisco J. Azcondo, Rosario Casanueva, F. Javier Díaz, Victor Manuel Lopez, Alejandro Navarro:
Pulsed current source to drive high-brightness LED lamps. 4591-4596 - Marcelo R. Cosetin, Paulo Cesar Vargas da Luz, Marcelo Freitas da Silva, Fabio Bisogno, J. Marcos Alonso, Ricardo N. do Prado:
Single-stage SEPIC-Buck converter for LED lighting with reduced storage capacitor. 4597-4603 - Javier Ribas, Ramón E. Díaz, Antonio J. Calleja, Jorge García, Emilio López Corominas, Jesús Cardesín Miranda:
Temperature effects on the small-signal characteristics of fluorescent lamps. 4604-4610 - Francesco Sichirollo, J. Marcos Alonso, Giorgio Spiazzi:
Use of current controlled mutual inductor to limit recycling current in the AHB-Flyback converter. 4611-4616 - Benoit Delinchant, Sana Gaaloul, Franck Verdiere, Frédéric Wurtz, Pierre-Yves Gibello:
The distribution of computing services for buildings design and optimal management: Cloud computing based on software component standard. 4620-4625 - Alexander Viehweider, Kanghyun Nam, Hiroshi Fujimoto, Yoichi Hori:
A fault detection and isolation scheme for lateral vehicle dynamics of EVs using a quantitative parity space approach. 4630-4636 - Matteo Carraro, Fabio Tinazzi, Mauro Zigliotto:
A novel approach to torque estimation in IPM synchronous motor drives. 4637-4641 - Sébastien Mariéthoz:
An accurate extended Kalman filter scheme for the reduction of the flux angle tracking error in sensorless induction motor drives. 4642-4647 - Francisco Huerta, Santiago Cóbreces, F. Javier Rodríguez, Christina Clancey, Ines Sanz:
Comparison of two black-box model identification methods applied on a VSC with LCL filter. 4648-4653 - Gerasimos G. Rigatos, Pierluigi Siano:
Sensorless nonlinear control of induction motors using Unscented Kalman Filtering. 4654-4659 - Dariusz Janiszewski:
Unscented Kalman Filter for sensorless PMSM drive with output filter fed by PWM converter. 4660-4665 - Sergio H. M. Durand, Vanderlei Bonato:
A tool to support Bluespec SystemVerilog coding based on UML diagrams. 4670-4675 - José-Inácio Rocha, Luís Gomes, Octávio Páscoa Dias:
Analysing storage resources on Synchronous Dataflows using Petri net verification techniques. 4676-4681 - Roberto de Medeiros, Marcilyanne Moreira Gois, Vanderlei Bonato:
Designing FPGA-based embedded systems with MARTE: A PIM to PSM converter. 4682-4687 - Jorge Rodríguez-Araújo, Juan J. Rodríguez-Andina, José Fariña, Félix Vidal, Jose Luis Mato, Ma Angeles Montealegre:
FPGA-based laser cladding system with increased robustness to optical defects. 4688-4693 - Denis Navarro, Oscar Lucía, Isidro Urriza, Luis Angel Barragan, Óscar Jiménez:
Modeling and simulation of power converter systems using SystemC system-level description language. 4694-4699 - Shahid M. Awan, Zubair A. Khan, Abdur Rehman, Waqar Mahmood:
A Multi-Agent system for data collection from power generators and weather stations in heterogeneous environments. 4704-4708 - Petr Kadera, Pavel Vrba, Václav Jirkovský:
Deviation detection in distributed control systems by means of statistical methods. 4709-4714 - Cyrille Pach, Thierry Berger, Yves Sallez, Damien Trentesaux:
Instantiation of the Open-Control concept in FMS based on potential fields. 4715-4720 - Xiangjun Li, Xinghuo Yu:
A generalized power transfer distribution factor for power injection analysis of power grids. 4724-4728 - Concettina Buccella, Carlo Cecati, Hamed Latafat, Kaveh Razi:
Comparative transient response analysis of LLC resonant converter controlled by adaptive PID and fuzzy logic controllers. 4729-4734 - Wencong Su, Jianhui Wang, Kuilin Zhang, Mo-Yuen Chow:
Framework for investigating the impact of PHEV charging on power distribution system and transportation network. 4735-4740 - Yong Feng, Bing Chen, Xinghuo Yu, Yongmin Yang:
Terminal sliding mode control of induction generator for wind energy conversion systems. 4741-4746 - Chris S. Edrington, Troy Bevis, Jesse Leonard, Amin Hasanzadeh:
Application of Power Hardware-in-the-Loop for electric vehicles: A case study utilizing switched reluctance machines. 4750-4757 - Seung Tae Cha, Haoran Zhao, Qiuwei Wu, Arshad Saleem, Jacob Østergaard:
Coordinated control scheme of battery energy storage system (BESS) and distributed generations (DGs) for electric distribution grid operation. 4758-4764 - Panos Kotsampopoulos, Vasilis Kleftakis, George Messinis, Nikos D. Hatziargyriou:
Design, development and operation of a PHIL environment for Distributed Energy Resources. 4765-4770 - Georg Lauss, Felix Lehfuss, Benoit Bletterie, Thomas I. Strasser, Roland Bründlinger:
Examination of LV grid phenomena by means of PHIL testing. 4771-4776 - Felix Lehfuss, Georg Lauss, Thomas I. Strasser:
Implementation of a multi-rating interface for Power-Hardware-in-the-Loop simulations. 4777-4782 - Nicholas Stroupe, Amin Hasanzadeh, Chris S. Edrington, Troy Bevis:
Multi-platform real-time realization of isolated permanent magnet synchronous generator. 4783-4788 - Muhammad Shoaib Almas, Rujiroj Leelaruji, Luigi Vanfretti:
Over-current relay model implementation for real time simulation & Hardware-in-the-Loop (HIL) validation. 4789-4796 - James Langston, Karl Schoder, Mischa Steurer, M. Omar Faruque, John Hauer, Ferenc Bogdan, Richard Bravo, Barry Mather, Farid Katiraei:
Power hardware-in-the-loop testing of a 500 kW photovoltaic array inverter. 4797-4802 - Jordan Varley, Matthew Martino, Shahab Poshtkouhi, Olivier Trescases:
Battery and ultra-capacitor hybrid energy storage system and power management scheme for solar-powered Wireless Sensor Nodes. 4806-4811 - Dawei He, Rui Xia, Weixuan Lin, Thomas G. Habetler:
A survey on consumer electronic products in residential home for demand response. 4816-4820 - Huijun Gao, Xuebo Yang, Wei Zhan, Hamid Reza Karimi:
Actuators and sensors allocation for adjacent buildings vibration control. 4821-4826 - Joern Ploennigs, Burkhard Hensel, Henrik Dibowski, Klaus Kabitzsch:
BASont - A modular, adaptive building automation system ontology. 4827-4833 - Seiya Ito, Hiroaki Nishi:
Estimation of the number of people under controlled ventilation using a CO2 concentration sensor. 4834-4839 - Dominik Bunyai, Lukas Krammer, Wolfgang Kastner:
Limiting constraints for ZigBee networks. 4840-4846 - Laurent-Frederic Ducreux, Claire Guyon-Gardeux, Suzanne Lesecq, François Pacull, Safietou Raby Thior:
Resource-based middleware in the context of heterogeneous building automation systems. 4847-4852 - Denis Stein, Matthias Lehmann, Joern Ploennigs, Klaus Kabitzsch:
Sensors, models and platform for ambient control. 4853-4859 - Sana Gaaloul, Xuan Hoa Binh Le, Benoit Delinchant, Frédéric Wurtz, Stéphane Ploix:
Software component architecture for co-simulation applied to the coupling between a building's thermal envelope and its inhabitant behaviour. 4860-4865 - Liang Du, Yi Yang, Dawei He, Ronald G. Harley, Thomas G. Habetler, Bin Lu:
Support vector machine based methods for non-intrusive identification of miscellaneous electric loads. 4866-4871 - Jason Anderson, Archana Sadhanala, Robert Cox:
Using smart meters for load monitoring and active power-factor correction. 4872-4876 - David George Dorrell:
Are wound-rotor synchronous motors suitable for use in high efficiency torque-dense automotive drives? 4880-4885 - Rita Mbayed, Georges Salloum, Lionel Vido, Eric Monmasson, Mohamed Gabsi:
Hybrid excitation synchronous motor control in electric vehicle with copper and iron losses minimization. 4886-4891 - Jiefeng Hu, Jianguo Zhu, Glenn Platt, David George Dorrell:
Model-predictive direct power control of AC/DC converters with one step delay compensation. 4892-4897 - Alireza Tashakori, Mehran Motamed Ektesabi:
Stability analysis of sensorless BLDC motor drive using digital PWM technique for electric vehicles. 4898-4903 - Junya Amada, Hiroshi Fujimoto:
Torque based direct driving force control method with driving stiffness estimation for electric vehicle with in-wheel motor. 4904-4909 - Carlos A. Martins, Philippe Viarouge, Jérôme Cros:
A transformerless resonant multilevel DC-DC step-up converter. 4922-4928 - Javier A. Muñoz, José R. Espinoza, Carlos R. Baier, Luis Morán, Johan I. Guzman, Jaime Addin Rohten:
Asymmetric multilevel STATCOM to compensate reactive power and current harmonics. 4929-4934 - Ricardo Lizana, Cristian Castillo, Marcelo A. Pérez, José Rodríguez:
Capacitor voltage balance of MMC converters in bidirectional power flow operation. 4935-4940 - Vicent Sala, Ramin Salehi, Manuel Moreno-Eguilaz, Mehdi Salehifar, Luis Romeral:
Clamping diode caused distortion in multilevel NPC Full-Bridge audio power amplifiers. 4941-4948 - Youssef Ounejjar, Kamal Al-Haddad:
Current control of the three phase five-level PUC-NPC converter. 4949-4954 - Anping Hu, David Xu, Jianhui Su, Bin Wu:
DC-link current balancing and ripple reduction for direct parallel current-source converters. 4955-4960 - Somboon Sangwongwanich:
Double-carrier-based modulation theory of three-level inverters and a new discontinuous PWM for neutral-point voltage balancing. 4961-4966 - Staffan Norrga, Lennart Angquist, Kalle Ilves, Lennart Harnefors, Hans-Peter Nee:
Frequency-domain modeling of modular multilevel converters. 4967-4972 - Amar Benaissa, Boualaga Rabhi, Mohamed-Fouad Benkhoris, Ammar Moussi, Jean-Claude Le Claire:
Fuzzy logic controller for five-level shunt active power filter under distorted voltage conditions. 4973-4978 - Mark L. A. Caris, Henk Huisman, Jan M. Schellekens, Jorge L. Duarte:
Generalized harmonic elimination method for interleaved power amplifiers. 4979-4984 - Ricard Picas, Josep Pou, Salvador Ceballos, Vassilios G. Agelidis, Maryam Saeedifard:
Minimization of the capacitor voltage fluctuations of a modular multilevel converter by circulating current control. 4985-4991 - Carlos R. Baier, Javier A. Muñoz, Johan I. Guzman, José R. Espinoza, Pedro E. Melin:
Reducing harmonics and DC-Link capacitors in cascaded multilevel converters using inter-cell magnetic couplings. 4992-4997 - Samir Kouro, Carlos D. Fuentes, Marcelo A. Pérez, José Rodríguez:
Single DC-link cascaded H-bridge multilevel multistring photovoltaic energy conversion system with inherent balanced operation. 4998-5005 - Amer M. Y. M. Ghias, Josep Pou, Mihai Ciobotaru, Vassilios G. Agelidis:
Voltage balancing of a five-level flying capacitor converter using optimum switching transitions. 5006-5012 - Amer M. Y. M. Ghias, Josep Pou, Mihai Ciobotaru, Vassilios G. Agelidis:
Voltage balancing strategy for a five-level flying capacitor converter using phase disposition PWM with sawtooth-shaped carriers. 5013-5019 - Petros P. Karamanakos, Konstantinos G. Pavlou, Stefanos N. Manias:
A model predictive control strategy for the cascaded H-bridge multilevel rectifier based on enumeration. 5024-5029 - Dae Keun Yoo, Liuping Wang:
Constrained predictive control of three-phase voltage source converters with explicit performance specifications. 5030-5036 - Akihiro Imura, Tomoya Takahashi, Masami Fujitsuna, Tadanao Zanma, Shinji Doki:
Dead-time compensation in model predictive instantaneous-current control. 5037-5042 - Pavel Vaclavek, Petr Blaha:
Enhanced discrete time model for AC induction machine model predictive control. 5043-5048 - Ana M. Llor, Maurice Fadel, Aziz Ziani, Marco Rivera, José Rodríguez:
Geometrical approach for a predictive current controller applied to a three-phase two-level four-leg inverter. 5049-5056 - Rachid Errouissi, Mohand A. Ouhrouche, Wen-Hua Chen:
Robust nonlinear predictive control of a permanent magnet synchronous motor. 5057-5064 - Min Zhang, David Atkinson, Matthew Armstrong:
A zero-sequence component injected PWM method with reduced switching losses and suppressed common-mode voltage for a three-phase four-leg voltage source inverter. 5068-5073 - Sumit K. Chattopadhyay, Chandan Chakraborty, Bikash C. Pal:
Cascaded H-Bridge & neutral point clamped hybrid asymmetric multilevel inverter topology for grid interactive transformerless photovoltaic power plant. 5074-5079 - Mostafa Mosa, Haitham Abu-Rub, Mahrous E. Ahmed, José Rodríguez:
Modified MPPT with using model predictive control for multilevel boost converter. 5080-5085 - Maziar Mobarrez, Majid Fazlali, M. Amin Bahmani, Torbjörn Thiringer:
Performance and loss evaluation of a hard and soft switched 2.4 MW, 4 kV to 6 kV isolated DC-DC converter for a wind energy application. 5086-5091 - Rémus Pusca, Cristian Demian, David Mercier, Eric Lefevre, Raphaël Romary:
An improvement of a diagnosis procedure for AC machines using two external flux sensors based on a fusion process with belief functions. 5096-5101 - Lucia Frosini, Ezio Bassi, Luca Girometta:
Detection of stator short circuits in inverter-fed induction motors. 5102-5107 - Francisco Vedreno-Santos, Martin Riera-Guasp, Humberto Henao, Manuel Pineda-Sánchez, Jose A. Antonino-Daviu:
Diagnosis of eccentricity in induction machines working under fluctuating load conditions, through the instantaneous frequency. 5108-5113 - Muddassar Abbas Rizvi, Syed Sajjad Haider Zaidi, M. Amin Akram, Aamer I. Bhatti:
Misfire fault detection in SI engine using sliding mode observer. 5114-5119 - Syed Sajjad H. Zaidi, Elias G. Strangas:
Non intrusive operational health identification of in-service electrical machine. 5120-5125 - Jesus Adolfo Carino-Corrales, Omar J. Osuna-Paez, Jesus Villalpando-Osuna, René de Jesús Romero-Troncoso, Eduardo Cabal-Yepez, Arturo Garcia-Perez, Roque Alfredo Osornio-Rios:
Novel methodology for improving performance of sensorless speed observers in induction motors at variable load conditions. 5126-5131 - Lotfi Saidi, Farhat Fnaiech, Gérard-André Capolino, Humberto Henao:
Stator current bi-spectrum patterns for induction machines multiple-faults detection. 5132-5137 - Vitor Monteiro, José G. Pinto, Bruno Exposto, Henrique Gonçalves, João C. Ferreira, Carlos Couto, João Luiz Afonso:
Assessment of a battery charger for Electric Vehicles with reactive power control. 5142-5147 - Andrew Stepanov, Maxim Vorobyov, Ilya Galkin:
Battery monitoring using high frequency impedance modulation through series power line. 5148-5152 - Mircea-Florian Vancu, Thiago Batista Soeiro, Jonas Mühlethaler, Johann Walter Kolar, D. Aggeler:
Comparative evaluation of bidirectional buck-type PFC converter systems for interfacing residential DC distribution systems to the smart grid. 5153-5160 - J. G. Pinto, Bruno Exposto, Vitor Monteiro, Luís F. C. Monteiro, Carlos Couto, João Luiz Afonso:
Comparison of current-source and voltage-source Shunt Active Power Filters for harmonic compensation and reactive power control. 5161-5166 - Carlos Roncero-Clemente, Enrique Romero-Cadaval, Pedro Roncero-Sánchez, Eva González Romera:
Comparison of two power flow control strategies for photovoltaic inverters. 5167-5172 - Argo Rosin, Ivo Palu, Kai Rosin, Aivar Auvaart:
Dimensioning of electricity storage according to small wind turbine power generation and household load patterns. 5173-5178 - Andrei Blinov, Volodymyr Ivakhno, Volodymyr Zamaruev, Dmitri Vinnikov, Oleksandr Husev:
Experimental verification of DC/DC converter with full-bridge active rectifier. 5179-5184 - João F. A. Martins, Vitor Fernão Pires, Celson Lima, Armando J. Pires:
Fault detection and diagnosis of grid-connected power inverters using PCA and current mean value. 5185-5190 - Daniel Wojciechowski:
High power grid interfacing AC-DC PWM converters with power conditioning capabilities. 5191-5196 - Marek Adamowicz, Ryszard Strzelecki, Zbigniew Krzeminski:
Hybrid high-frequency-SiC and line-frequency-Si based PEBB for MV modular power converters. 5197-5202 - Federico Martin Serra, Cristian H. De Angelo, Daniel G. Forchetti:
IDA-PBC control of a three-phase front-end converter. 5203-5208 - Viktor Beldjajev, Indrek Roasto:
Impact of component losses on the efficiency of the bi-directional current doubler rectifier based isolation-stage. 5209-5214 - Diogo Varajao, Rui Esteves Araujo, Carlos L. Moreira, João A. Peças Lopes:
Impact of phase-shift modulation on the performance of a single-stage bidirectional electric vehicle charger. 5215-5220 - Isabel María Moreno-García, Antonio Moreno-Muñoz, Francisco Domingo Pérez, Víctor Pallarés López, Rafael J. Real-Calvo, Juan José González de la Rosa:
Intelligent electronic device for Smart Grid: Statistical approach applied to event detection. 5221-5226 - Carlos Silvestre, Duarte M. Sousa, António Roque:
Reactive power compensation using on board stored energy in Electric Vehicles. 5227-5232 - Gabriel Ortiz, Dominik Bortis, Johann Walter Kolar, Oscar Apeldoorn:
Soft-switching techniques for medium-voltage isolated bidirectional DC/DC converters in solid state transformers. 5233-5240 - Indrek Roasto, Enrique Romero-Cadaval, João Martins, Robert Smolenski:
State of the art of active power electronic transformers for smart grids. 5241-5246 - João F. A. Martins, Rui Lopes, Vitor Fernão Pires, Armando J. Pires, Celson Lima:
The application of S-transform in fault detection and diagnosis of grid-connected power inverters. 5247-5252 - Víctor Miñambres-Marcos, Enrique Romero-Cadaval, Miguel Angel Guerrero-Martinez, María Isabel Milanés-Montero:
Three-phase single stage photovoltaic inverter with active filtering capabilities. 5253-5258 - Ana Vidal, Francisco D. Freijedo, Alejandro G. Yepes, Jano Malvar, Óscar Lopez, Jesús Doval-Gandoy:
Transient response assessment of vector PI current controllers in renewable energy applications. 5259-5264 - Yushan Liu, Haitham Abu-Rub, Baoming Ge, Fang Zheng Peng:
Analysis of space vector modulations for three-phase Z-Source / quasi-Z-source inverter. 5268-5273 - Arturo A. Arias M., Wilfried Hofmann:
Carrier-based PWM for Z-Source Inverters. 5274-5279 - V. Saravanan, P. Sureshkumar, R. Ramanujam, M. Arumugam:
Comprehensive analysis of Z source DC/DC converters for DC power supply systems. 5280-5284 - Adda Ravindranath, Olive Ray, Santanu Mishra, Avinash Joshi:
DSP based PWM control of Switched Boost Inverter for DC nanogrid applications. 5285-5290 - Manuel Steinbring, Mario Pacas, Mohammed Alnajjar:
Emulation of a micro-hydro-turbine for stand-alone power plants with Z-Source inverter. 5291-5296 - Omar Ellabban, Haitham Abu-Rub:
Indirect field oriented control of an induction motor fed by a bidirectional quasi Z-source inverter. 5297-5302 - Shuo Liu, Baoming Ge, Haitham Abu-Rub, Fang Zheng Peng, Yushan Liu:
Quasi-Z-source matrix converter based induction motor drives. 5303-5307 - Alireza Javadi, Handy Fortin Blanchette, Kamal Al-Haddad:
A novel transformerless hybrid series active filter. 5312-5317 - Alireza Javadi, Handy Fortin Blanchette, Kamal Al-Haddad:
An advanced control algorithm for Series hybrid active filter adopting UPQC behavior. 5318-5323 - Md. Shirajum Munir, Yun Wei Li:
Harmonic compensation using residential PV interfacing inverter. 5324-5329 - Ahmed Moawwad, Vinod Khadkikar, James L. Kirtley:
Interline photovoltaic (I-PV) power plants for voltage unbalance compensation. 5330-5334 - Mohamed Shawky El Moursi, Vinod Khadkikar:
Novel control strategies for SSR mitigation and damping power system oscillations in a series compensated wind park. 5335-5342 - Fletcher E. Fleming, Chris S. Edrington:
A comparison of machine modeling methods for real-time applications. 5346-5351 - Leonard W. White, Subhashish Bhattacharya:
A single phase PSCad electric arc furnace model. 5352-5356 - Adriano S. Carvalho, Maria Teresa Outeiro:
Accurate Matlab/Simulink model of a power generation system based on fuel cells. 5357-5364 - Arthur Shoihet, Michael A. Slonim:
Analysis of Transient Processes of Buck-Boost Converter: Theoretical analysis, physical experiments, modeling and simulation. 5365-5369 - Ana B. M. Aguiar, Arezki Merkhouf, Claude Hudon, Kamal Al-Haddad:
Investigation of the electromagnetic simulation results variation of a hydro electrical generator. 5370-5375 - Byunghwan Lee, Namju Jeon, Hyeongcheol Lee:
Model-based fault detection and isolation algorithm of current sensor for IPMSM. 5376-5381 - Ivica Stevanovic, Bernhard Wunsch, Gian Luigi Madonna, Mircea-Florian Vancu, Stanislav Skibin:
Multiconductor cable modeling for EMI simulations in power electronics. 5382-5387 - Norma Anglani, Michele Bossi, Giusi Quartarone:
Optimal energy conversion through performing compressed air systems. 5388-5393 - Hong Cheng, Cong Wang, Jin-biao Zhu, Ge Biao:
Output short circuit spark discharging modeling of Quasi-Z-source buck converter. 5394-5398 - Jan Leuchter, Karel Zaplatilek, Pavol Bauer:
Photovoltaic model for circuit simulation. 5399-5405 - Takashi Sonoda, Kazuo Ishii, Amir Ali Forough Nassiraei, Ivan Godler:
Control of robotic joint by using antagonistic pair of Twist Drive Actuators. 5410-5415 - Takahiro Mikami, Yasutaka Fujimoto:
Design of a high-thrust density spiral motor using Finite Element Analysis. 5416-5421 - Ken Tashiro, Syunsuke Nansai, Masami Iwase, Shoshiro Hatakeyama:
Development of snake-like robot climbing up slope in consideration of constraint force. 5422-5427 - Toshiaki Tsuji, Tomonori Yokoo, Sho Sakaino:
High bandwidth attitude control based on musculoskeletal system with biarticular muscles. 5428-5433 - Naoki Oda, Osamu Yanada:
Motion controller design of biped robot for human-like walking with stretched knee. 5434-5439 - Luis Fajardo Rodriguez, Ruxandra Mihaela Botez:
Civil turbofan engines thrust generic model. 5444-5450 - Oliviu Sugar Gabor, Andreea Koreanschi, Ruxandra Mihaela Botez:
Low-speed aerodynamic characteristics improvement of ATR 42 airfoil using a morphing wing approach. 5451-5456 - Teodor Lucian Grigorie, Radu Obreja, J. Corcau, L. Dinca:
Matlab/Simulink software implementation and interfacing of a strap-down inertial attitude method. 5457-5462 - Martin Gendrin, Louis-A. Dessaint:
Multidomain high-detailed modeling of an electro-hydrostatic actuator and advanced position control. 5463-5470 - Yamina Boughari, Ruxandra Mihaela Botez:
Optimal flight control on the hawker 800 XP business aircraft. 5471-5476 - Jenica Corcau, Teodor Lucian Grigorie, Liviu Dinca:
Simulation and analysis of a fuel cell/battery hybrid power supply for More-Electric Aircraft. 5477-5481 - Roberto Salvador Félix Patrón, Ruxandra Mihaela Botez, Dominique Labour:
Vertical profile optimization for the Flight Management System CMA-9000 using the golden section search method. 5482-5488 - Nicoleta Anton, Ruxandra Mihaela Botez:
Weight Functions Method application on a delta-wing X-31 configuration. 5489-5498 - Juan C. Gómez, Medhat M. Morcos:
Undervoltage/overcurrent coordination in Smart Grids. 5502-5505 - Zita V. Farkas, Péter Korondi, Daniel Illy, Lorant Fodor:
Aesthetic marker design for home robot localization. 5510-5515 - Csanád Szabó, András Róka, Tamás Faragó, Márta Gácsi, Ádám Miklósi, Péter Korondi:
Building a human-dog interaction inspired emotional engine model. 5516-5522 - Mihoko Niitsuma, Takuya Ichikawa, Ryuichi Numakunai, Akira Onodera, Péter Korondi, Hideki Hashimoto:
Design of social behavior of physical agent in intelligent space. 5523-5528 - Hajime Kikuchi, Kazuyuki Morioka:
Development of wireless image sensor nodes based on FPGA for human tracking in intelligent space. 5529-5534 - Nader Fnaiech, Hayfa Hammami, Amel Yahyaoui, Christophe Varnier, Farhat Fnaiech, Noureddine Zerhouni:
New Hopfield Neural Network for joint Job Shop Scheduling of production and maintenance. 5535-5541 - Sousuke Nakamura, Takuma Nakano, Noriki Mochizuki, Hitomi Araki, Hideki Hashimoto:
Proposal of sleep-promoting robot using vibratory pressure and sound stimulation. 5542-5546 - Zita V. Farkas, Péter Korondi, Lorant Fodor:
Safety aspects and guidelines for robot compatible environment. 5547-5552 - Nicolas Louis, Philippe Gorce:
A kinematic model to analyze and simulate wheelchair propulsion. 5562-5567 - Nasser Rezzoug, Julien Jacquier-Bret, Vincent Hernandez, Philippe Gorce:
Application of robotic indices to evaluate human upper-limb force capacities. 5568-5573 - Ricardo Sandoval-Torres, Manuel Adam-Medina, Ilse Cervantes, Irwin A. Diaz-Diaz:
A switched control for UAVs. 5578-5583 - Yoonsoo Kim, Byoung Soo Kim:
Purely aerodynamic pitch control for high-angle-of-attack missiles. 5584-5588 - Yoonsoo Kim, Byoung Soo Kim:
Robust pitch autopilot design for agile missiles at high angle of attack. 5589-5592 - Mario Rizo, Francisco Huerta, Emilio Bueno, Marco Liserre:
A synchronization technique for microgrid reclosing after islanding operation. 5596-5601 - Mazen Abdel-Salam, Adel Ahmed, Hamdy A. Ziedan, Rashad Kamel, Khairy Sayed, Mahmoud Amery, Mohamed Swify:
Analysis of protection system for a microgrid supplying irrigation load in Toshka Area. 5602-5606 - Diego Arcos-Aviles, Francisco Guinjoan, J. Barricarte, Luis Marroyo, Pablo Sanchis, H. Valderrama:
Battery management fuzzy control for a grid- tied microgrid with renewable generation. 5607-5612 - Rubén Ortega, Gabriel Garcerá, Emilio Figueres, Oscar Carranza:
Comparative analysis of two control schemes for reduction of the THD in voltage applied to a single-phase inverter with nonlinear loads. 5613-5618 - Alexander Micallef, Maurice Apap, Cyril Spiteri Staines, Josep M. Guerrero:
Cooperative control with virtual selective harmonic capacitance for harmonic voltage compensation in islanded microgrids. 5619-5624 - Dong Chen, Lie Xu, Liangzhong Yao:
DC network stability and dynamic analysis using virtual impedance method. 5625-5630 - Andres Vargas-Serrano, Doris Sáez, Lorenzo Reyes, Bernardo Severino, Rodrigo Palma-Behnke, Roberto Cárdenas-Dobson:
Design and experimental validation of a dual mode VSI control system for a micro-grid with multiple generators. 5631-5636 - Qobad Shafiee, Juan C. Vasquez, Josep M. Guerrero:
Distributed secondary control for islanded MicroGrids - A networked control systems approach. 5637-5642 - Jiravan Mongkoltanatas, Delphine Riu, Xavier Le Pivert:
Energy storage design for primary frequency control for islanding micro grid. 5643-5649 - Paolo Tenti, Alessandro Costabeber, Francesco Sichirollo, Paolo Mattavelli:
Minimum loss control of low-voltage residential microgrids. 5650-5656 - Vishal Vekhande, Baylon G. Fernandes:
Module integrated DC-DC converter for integration of photovoltaic source with DC micro-grid. 5657-5662 - Kurtis Unger, Mehrdad Kazerani:
Organically grown microgrids: Development of a solar neighborhood microgrid concept for off-grid communities. 5663-5668 - Luis Valverde, Carlos Bordons, Felipe Rosa:
Power management using model predictive control in a hydrogen-based microgrid. 5669-5676 - Xiaonan Lu, Kai Sun, Josep M. Guerrero, Lipei Huang:
SoC-based dynamic power sharing method with AC-bus voltage restoration for microgrid applications. 5677-5682 - Estefania Planas, Asier Gil-de-Muro, Jon Andreu, Iñigo Kortabarria, Iñigo Martínez de Alegría:
Stability analysis and design of droop control method in dq frame for connection in parallel of distributed energy resources. 5683-5688 - Mazen Abdel-Salam, Adel Ahmed, Hamdy A. Ziedan, Rashad Kamel, Khairy Sayed, Mahmoud Amery, Mohamed Swify:
Steady-state modeling and control of a microgrid supplying irrigation load in Toshka Area. 5689-5694 - Sudip K. Mazumder, Priyadharshini T. Sivasubramanian:
A modular approach for current-source multi-phase inverter. 5698-5701 - Giampaolo Buticchi, Davide Barater, Emilio Lorenzani, Andrea Salati:
Active common-mode filter for photovoltaic transformerless inverters. 5702-5707 - F. Scarpetta, Marco Liserre, Rosa A. Mastromauro:
Adaptive distributed MPPT algorithm for photovoltaic systems. 5708-5713 - Raúl Santiago Muñoz-Aguilar, Pedro Rodríguez, Gerardo Vázquez, Ignacio Candela, Emiliano Aldabas:
Efficiency analysis of DCM-232 three-phase PV topology. 5714-5719 - Jin-Woo Jang, Young-Ho Kim, Dong-Kyun Ryu, Chung-Yuen Won, Yong-Che Jung:
High efficiency control method for interleaved flyback inverter with synchronous rectifier based on photovoltaic AC modules. 5720-5725 - Gerardo Escobar, Carl Ngai Man Ho, Sami Pettersson:
Maximum power point searching method for partial shaded PV strings. 5726-5731 - Sebastian Strache, Jan Henning Mueller, Dominik Platz, Ralf Wunderlich, Stefan Heinen:
Maximum power point tracker for small number of solar cells connected in series. 5732-5737 - Sandeep Anand, Baylon G. Fernandes:
Multilevel open-ended transformer based grid feeding inverter for solar photovoltaic application. 5738-5743 - Moumita Das, Vivek Agarwal:
A novel, high efficiency, high gain, front end DC-DC converter for low input voltage solar photovoltaic applications. 5744-5749 - Lei Tang, Wei Xu, Chengbi Zeng, Jinhu Lv, Jinwei He:
One novel variable step-size MPPT algorithm for photovoltaic power generation. 5750-5755 - Davide Barater, Giampaolo Buticchi, Emilio Lorenzani, V. Malori:
Transformerless grid-connected converter for PV plants with constant common mode voltage and arbitrary power factor. 5756-5761 - Stamatis Karnouskos, Armando Walter Colombo, Thomas Bangemann, Keijo Manninen, Roberto Camp, Marcel Tilly, Petr Stluka, François Jammes, Jerker Delsing, Jens Eliasson:
A SOA-based architecture for empowering future collaborative cloud-based industrial automation. 5766-5772 - Stjepan Sucic, Bernard Bony, Laurent Guise, François Jammes, Ante Marusic:
Integrating DPWS and OPC UA device-level SOA features into IEC 61850 applications. 5773-5778 - Per Lindgren, Henrik Mäkitaavola, Johan Eriksson, Jens Eliasson:
Leveraging tinyos for integration in process automation and control systems. 5779-5785 - Jerker Delsing, Fredrik Rosenqvist, Oscar Carlsson, Armando W. Colombo, Thomas Bangemann:
Migration of industrial process control systems into service oriented architecture. 5786-5792 - Pavel Trnka, Petr Kodet, Vladimír Havlena:
OPC-UA information model for large-scale process control applications. 5793-5798 - François Jammes, Bernard Bony, Philippe Nappey, Armando W. Colombo, Jerker Delsing, Jens Eliasson, Rumen Kyusakov, Stamatis Karnouskos, Petr Stluka, Marcel Tilly:
Technologies for SOA-based distributed large scale process monitoring and control systems. 5799-5804 - Pawel Pietrzak, Per Lindgren, Henrik Mäkitaavola:
Towards a lightweight CEP engine for embedded systems. 5805-5810 - Dorian Mora, Marco Taisch, Armando Walter Colombo:
Towards an energy management system of systems: An industrial case study. 5811-5816 - Amin Hasanzadeh, Chris S. Edrington, Troy Bevis:
Comprehensive study of power quality criteria generated by PV converters and their impacts on distribution transformers. 5820-5826 - Sirichai Tammaruckwattana, Kazuhiro Ohyama:
Experimental verification of variable speed wind power generation system using permanent magnet synchronous generator by wind turbine emulator. 5827-5832 - Vasudeo B. Virulkar, Mohan V. Aware:
Power system flicker analysis, modeling and prototype implementation. 5833-5839 - Szymon Piasecki, Marek Jasinski, Grzegorz Wrona, Waldemar Chmielak:
Robust control of grid connected AC-DC converter for distributed generation. 5840-5845 - Samir Hazra, Subhashish Bhattacharya:
Short time power smoothing of a low power wave energy system. 5846-5851 - Oleksandr Husev, Serhii Stepenko, Carlos Roncero-Clemente, Enrique Romero-Cadaval, Dmitri Vinnikov:
Single phase three-level quasi-z-source inverter with a new boost modulation technique. 5852-5857 - Dao Zhou, Frede Blaabjerg, Mogens Lau, Michael Tønnes:
Thermal analysis of multi-MW two-level wind power converter. 5858-5864 - Takeyuki Fujisaka, Ryosuke O. Suzuki:
Dimensional optimization of thermoelectric modules for solar power generation. 5868-5872 - Ryosuke O. Suzuki, Yuto Sasaki, Takeyuki Fujisaka, Min Chen:
Power generation using the fluids blown perpendicular to the TE panel. 5873-5878 - Xavier Rain, Mickaël Hilairet, Antoni Arias:
Reducing the sampling frequency for the control of the switched reluctance machine. 5882-5887 - Majid Pahlevaninezhad, Suzan Eren, Alireza R. Bakhshai, Praveen K. Jain:
A Control Lyapunov Function-based controller for a two-stage AC/DC converter. 5892-5897 - Alireza Tajfar, Sudip K. Mazumder:
A fault-tolerant switching scheme for a high-power high-frequency-link inverter. 5898-5903 - M. Reza Dehbozorgi, Cédric Somers, Kamal Al-Haddad:
A new Magnetically Coupled Balancing Topology for serially connection of multiple switched mode power supplies for high voltage application. 5904-5909 - Masoud Karimi-Ghartemani, Sayed Ali Khajehoddin, Mohsen Mojiri, Praveen K. Jain, Alireza R. Bakhshai:
A resonant controller with robust features for digital implementations at low sampling frequency. 5910-5915 - Sepide Rafiei, Alireza R. Bakhshai:
A review on energy efficiency optimization in Smart Grid. 5916-5919 - Ming-Fa Tsai, Chung-Shi Tseng, Zen-Chen Zhou:
Adaptive control design for the buck-boost converter with desired pole/zero assignment. 5920-5925 - Mohammad Hassanzahraee, Alireza R. Bakhshai:
Adaptive transient power control strategy for parallel-connected inverters in an islanded microgrid. 5926-5931 - Mohammad Ebrahimi, Hamid Reza Karshenas, Mohammad Hassanzahraee:
Comparison of orthogonal quantity generation methods used in single-phase grid-connected inverters. 5932-5937 - Galina Mirzaeva, Graham C. Goodwin:
Feedback Quantizer vs Sigma-Delta Modulator for Voltage Source Inverters. 5938-5943 - Hani Vahedi, Ehsan Pashajavid, Kamal Al-Haddad:
Fixed-band fixed-frequency hysteresis current control used In APFs. 5944-5948 - Alberto Dominguez Vicente, Aránzazu Otín, Luis Angel Barragan, Oscar Lucía, José Ignacio Artigas:
Modeling of resonant inverters with high harmonic content using the extended describing function method. 5949-5954 - Marcelo Hahn Durgante, Márcio Stefanello:
Multi loop deadbeat+repetitive and adaptive control for power converters with LCL filters. 5955-5960 - Albert Iskhakov, Vladimir Pospelov, Valery Kobylyansky, Sergey Skovpen:
On the direct deadbeat control of switched-mode power converters. 5961-5965 - Joanne C. Y. Hui, Praveen K. Jain:
Power management and control of a wind energy conversion system (WECS) with a fuzzy logic based maximum power point tracking (MPPT). 5966-5971 - Sudip K. Mazumder, Alireza Tajfar:
Sequence-based Lyapunov stability of power-electronic converters. 5972-5980 - Elena Aguilar, Antonio Torralba, Ramón González Carvajal, Joaquín Cabezas, José Sánchez, José Manuel Salmerón:
A monitoring system for identification and validation of the energetic model of a building using Wireless Sensor Networks. 5984-5989 - Abílio Azenha, Luis Peneda, Adriano Carvalho:
A neural network approach for Radio Frequency based indoors localization. 5990-5995 - Jose Peral, Emilio Merlo, Ricardo Labrador, Antonio Torralba, Ramón G. Carvajal, María Gil, Daniel Villalba, Alfonso Grande, M. Moreno, Jesús Viguera:
Automated meter reading based on IEEE 802.15.4. 5996-6001 - David Daza, Elena Aguilar, Ramón González Carvajal, Carlos Rubia-Marcos:
Development of a cascade topology on IEEE 802.15.4 for a vertical transportation system. 6002-6006 - Carlos Henrique Barriquello, Gustavo Weber Denardin, Alexandre Campos, Ricardo N. do Prado:
Game theoretic channel assignment for wireless sensor networks with geographic routing. 6007-6012 - Gabriel Mujica, Victor Rosello, Jorge Portilla, Teresa Riesgo:
Hardware-software integration platform for a WSN testbed based on cookies nodes. 6013-6018 - Joaquín Cabezas, Elena Aguilar, Alejandro Pastor, Alejandro Méndez, Antonio Torralba, Ramón G. Carvajal, Evaristo Aranda, Jesús Viguera:
On the design of wireless sensor networks for autonomous heliostats in Solar Tower Power Plants. 6019-6023 - Danping He, Gabriel Mujica, Jorge Portilla, Teresa Riesgo:
Simulation tool and case study for planning wireless sensor network. 6024-6028 - Jihoon Yang, Jorge Portilla, Teresa Riesgo:
Smart parking service based on Wireless Sensor Networks. 6029-6034 - Eduardo Hidalgo Fort, Fernando Muñoz, Alfonso Guerrero de Mier, Ramón G. Carvajal, Antonio Torralba, Rafael Castro-Triguero, Rafael Gallego:
Wireless Structural Health Monitoring system based on Autoregressive models. 6035-6040 - Roberto Cárdenas, Jon C. Clare, Patrick W. Wheeler:
4-leg matrix converter interface for a variable-speed diesel generation system. 6044-6049 - Jose M. Lozano, Miguel A. Hernandez-Figueroa, Juan M. Ramirez:
An operative comparison of two DVR topologies based on a matrix converter without energy storage. 6050-6056 - Liliana de Lillo, Lee Empringham, Patrick W. Wheeler, Martin Schulz:
Challenges of high speed digital control in a SiC JFET matrix converter implementation. 6057-6062 - Christian F. Calvillo, Alejandro Olloqui, Fernando Martell, José Luis Elizondo, Alfonso Ávila, Manuel Eduardo Macías, Marco Rivera, José Rodríguez:
Comparison of Model Based Predictive Control and Fuzzy Logic Control of a DFIG with an Indirect Matrix Converter. 6063-6068 - Bingsen Wang, Giri Venkataramanan:
Dynamics and stability of matrix-converter based permanent magnet wind turbine generator. 6069-6075 - Thomas Schulte, Günter Schröder:
Efficiency analysis for RB-IGBT based matrix converters. 6076-6081 - Christopher Brunson, Liliana de Lillo, Lee Empringham, Pat Wheeler, Jon C. Clare:
Fault location in matrix converters using low frequency modulation matrices for SVM based modulation techniques. 6082-6087 - Wei Cai, Bi He, Xiaofeng Zhang, Mingzhong Qiao:
Improved two-steps voltage-commutation strategy under non-1 input power factor in matrix converter. 6088-6092 - Ekrem Karaman, Mehdi Farasat, Andrzej M. Trzynadlowski:
Matrix converter with a series Z-source. 6093-6098 - Korawich Niyomsatian, Surachet Samermurn, Surapong Suwankawin, Somboon Sangwongwanich:
Novel topologies for three-level back-to-back converters based on matrix converter theory. 6099-6104 - Marco Rivera, José Rodríguez, José R. Espinoza, Bin Wu:
Reduction of common-mode voltage in an indirect matrix converter with imposed sinusoidal input/output waveforms. 6105-6110 - Tuyen Dinh Nguyen, Hong-Hee Lee:
Space vector modulation for single-input dual-output indirect matrix converter. 6111-6116 - Filipe Moutinho, Luís Gomes:
Extending a net splitting operation for decomposition of high-level Petri nets. 6120-6125 - Henrique Dezani, Luís Gomes, Furio Damiani, Norian Marranghello:
Finding best urban routes based on analyses of high level and IOPT Petri net models. 6126-6131 - Anikó Costa, Luís Gomes, João Paulo Barros:
Model composition by reusing Petri net based modules. 6132-6137 - João Paulo Barros, Luís Gomes, Anikó Costa:
On the verification of non-autonomous Petri net models using autonomous petri net tools. 6138-6143 - Armando W. Colombo, J. Marco Mendes, Paulo Leitão, Stamatis Karnouskos:
Service-oriented SCADA and MES supporting Petri nets based orchestrated automation systems. 6144-6150 - Fernando Pereira, Filipe Moutinho, José Ribeiro, Luís Gomes:
Web based IOPT Petri net Editor with an extensible plugin architecture to support generic net operations. 6151-6156 - Markus Göring, Alexander Fay:
Automation systems - Formal modeling of temporal change of physical structure. 6160-6165 - Michael Weyrich, Philipp Klein:
Engineering of automated manufacturing systems with mechatronic objects. 6166-6171 - Vlado Altmann, Jan Skodzik, Frank Golatowski, Dirk Timmermann:
Investigation of the use of embedded Web Services in smart metering applications. 6172-6177 - Richard Mordinyi, Thomas Moser, Dietmar Winkler, Stefan Biffl:
Navigating between tools in heterogeneous Automation Systems Engineering landscapes. 6178-6184 - Susanne Rösch, Daniel Schütz, Gülden Bayrak, Birgit Vogel-Heuser:
Supporting integrated development of closed-loop PLC control software for production systems. 6185-6190 - Luca Ferraris, Paolo Ferraris, Emir Poskovic, Alberto Tenconi:
Evaluation of the magnetization direction effects on ferrite PM brushless fractional machines. 6194-6199 - Wenlong Li, K. T. Chau, Christopher H. T. Lee:
Optimal design and implementation of a permanent magnet linear vernier machine for direct-drive wave energy extraction. 6200-6205 - Hiroaki Utsugi, Kiyoshi Ohishi, Hitoshi Haga:
Reduction in current harmonics of electrolytic capacitor-less diode rectifier using inverter-controlled IPM motor. 6206-6211 - Yu Zhang, Wei Xu, Nian Liu, Yunhong Zhang, Jiefeng Hu, Jianguo Zhu:
Research on lightning over-voltage in 1000kV gas insulated switchgear substation. 6212-6217 - Bin Qin, Wei Xu, Nian Liu, Yunhong Zhang, Jiefeng Hu, Jianguo Zhu:
Theoretical research on short circuit fault of rotor inner winding in large turbo generator. 6218-6223 - Pradeep Dandamudi, Timothy A. Brown, Xing Wu, Marcin Jagiela, Bogdan M. Wilamowski:
A design methodology of lossy transconductance filters. 6228-6233 - Xin Jin, Fa Foster Dai:
A 100MHz fifth-order low-pass gm-C filter using folded stages. 6234-6239 - Yuehai Jin, Fa Foster Dai:
A harmonic rejection mixer in wideband transmitter. 6240-6243 - Hossein Noori, Fa Foster Dai:
Effect of CMOS device sizing on circuit noise performance. 6244-6247 - Phuoc T. Tran, Herbert L. Hess, Kenneth V. Noren:
Operational amplifier design with gain-enhancement differential amplifier. 6248-6253 - Salem Rahmani, Abdelhamid Hamadi, Kamal Al-Haddad:
A comprehensive analysis of hybrid active power filter for power quality enhancement. 6258-6267 - Parameshwaran Gananchchelvi, Jiao Yu, Michael S. Pukish:
Current trends in in-vehicle electrical engineering applications. 6268-6273 - Xing Wu, Hao Yu, Tiantian Xie, Michael S. Pukish:
Current trends in industrial control. 6274-6279 - Philip D. Reiner, Tiantian Xie:
Current trends in power aware design. 6280-6284 - Dietmar Bruckner, Jan Haase, Peter Palensky, Gerhard Zucker:
Latest trends in integrating building automation and smart grids. 6285-6290 - Stefan Brock, Krzysztof Zawirski:
New approaches to selected problems of precise speed and position control of drives. 6291-6296 - Michael C. Hamilton:
Recent advances in energy harvesting technology and techniques. 6297-6304 - Michael S. Pukish, Philip Reiner, Xing Wu:
Recent advances in the application of real-time computational intelligence to industrial electronics. 6305-6314 - Michael S. Pukish, Parameshwaran Gnanachchelvi, Xing Wu:
Recent developments in wireless hardware design, modeling, and analysis for industrial applications. 6315-6319 - Alireza Javadi, Nicolas Geiss, Handy Fortin Blanchette, Kamal Al-Haddad:
Series active conditionners for reliable Smart grid: A comprehensive review. 6320-6327 - Hadi Youssef Kanaan, Kamal Al-Haddad, Salem Rahmani:
Switch-mode power converters for harmonics mitigation in power systems - Technology progress. 6328-6337
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-10-31 20:21 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
