• case-insensitive prefix search: default
  e.g., sig matches "SIGIR" as well as "signal"
• exact word search: append dollar sign ($) to word
  e.g., graph$ matches "graph", but not "graphics"
• boolean and: separate words by space
  e.g., codd model
• boolean or: connect words by pipe symbol (|)
  e.g., graph|network

Update May 7, 2017: Please note that we had to disable the phrase search operator (.) and the boolean not operator (-) due to technical problems. For the time being, phrase search queries will yield regular prefix search result, and search terms preceded by a minus will be interpreted as regular (positive) search terms.

found 128 matches

• 2011
• 
  Go Abe, Masatoshi Aritoshi, Tomoki Tomita, Keiichi Shirase:
  Development of On-Machine Measurement System Utilizing Line Laser Displacement Sensor. Int. J. Autom. Technol. 5(5): 708-714 (2011)
• 
  Hideaki Aburatani:
  Drive of Piezoelectric Actuators Using an Electrical Depoling Process. Int. J. Autom. Technol. 5(4): 601-605 (2011)
• 
  Shukri M. Afazov, Svetan M. Ratchev, Adib A. Becker, Shulong Liu, Joel Segal:
  Numerical Analyses of Turning-Induced and Mapped Ti6Al4V Residual Stresses for a Disc Subjected to Centrifugal Loading. Int. J. Autom. Technol. 5(3): 326-333 (2011)
• 
  Tetsuya Akagi, Shujiro Dohta, Hiroaki Kuno, Akimasa Fukuhara:
  Development of Flexible Sensors for Measuring Human Motion and Displacement of Novel Flexible Pneumatic Actuator. Int. J. Autom. Technol. 5(5): 621-628 (2011)
• 
  Tetsuya Akagi, Shujiro Dohta, Feifei Zhao, Takahiro Fujikawa:
  Development and Attitude Control of Flexible Robot Arm Using Flexible Pneumatic Cylinder with Simple Structure. Int. J. Autom. Technol. 5(4): 523-530 (2011)
• 
  Marcelo H. Ang Jr.:
  Editorial: Mechatronics. Int. J. Autom. Technol. 5(6): 891 (2011)
• 
  Tojiro Aoyama:
  Editorial: High Performance Cutting and Related Manufacturing Technologies. Int. J. Autom. Technol. 5(3): 269 (2011)
• 
  Yusuke Asano, Ryoshu Furutani, Miyu Ozaki:
  Verification of Interim Check Method of CMM. Int. J. Autom. Technol. 5(2): 115-119 (2011)
• 
  Dirk Bähre, Kirsten Trapp, Ralf Tschuncky:
  Influences on Occurrence of Magnetism During Cutting Processes. Int. J. Autom. Technol. 5(3): 294-299 (2011)
• 
  Christian Brecher, Adam Wissmann:
  Compensation of Thermo-Dependent Machine Tool Deformations Due to Spindle Load Based on Reduced Modeling Effort. Int. J. Autom. Technol. 5(5): 679-687 (2011)
• 
  Ekkard Brinksmeier, Carsten Heinzel, Martin Garbrecht, Jens Sölter, Griet Reucher:
  Residual Stresses in High Speed Turning of Thin-Walled Cylindrical Workpieces. Int. J. Autom. Technol. 5(3): 313-319 (2011)
• 
  Jerome Carlier, Toshiyuki Murakami:
  Virtual Force Field Based of Force-Feedback of Road Condition for Driving Assistant Design in Electric Vehicle. Int. J. Autom. Technol. 5(6): 908-915 (2011)
• 
  Neng-Hsin Chiu, Jie-Wei Lee:
  Grey Prediction of CBN Grinding Process. Int. J. Autom. Technol. 5(3): 420-426 (2011)
• 
  Tahsin Chou, Wen-Hsien Yang, Kuei-Yuan Cheng, Yu-Chen Chang, Thomas Luo:
  The Simulation and Inspection for the Starting Phenomenon of Slit Coating Process on Glass Substrate. Int. J. Autom. Technol. 5(2): 190-194 (2011)
• 
  Tahsin Chou, Wen-Hsien Yang, Tzu-Yu Huang, Hong Hocheng:
  Roll-to-Roll Embossing of Sunlight Guide Film with Wide Outgoing Angle. Int. J. Autom. Technol. 5(2): 212-217 (2011)
• 
  Berend Denkena, Jens Köhler, Roland Meyer, Hendrik Stiffel:
  Modification of the Tool-Workpiece Contact Conditions to Influence the Tool Wear and Workpiece Loading During Hard Turning. Int. J. Autom. Technol. 5(3): 353-361 (2011)
• 
  Michael Duscha, Fritz Klocke, Hagen Wegner:
  Residual Stress Model for Speed-Stroke Grinding of Hardened Steel with CBN Grinding Wheels. Int. J. Autom. Technol. 5(3): 439-444 (2011)
• 
  Kazuhiro Enami, Tatsuya Kume, Yasuo Higashi, Kenji Ueno:
  3D Measurement of the Inner Shape of a 1-Cell Accelerator Cavity. Int. J. Autom. Technol. 5(2): 156-161 (2011)
• 
  Ohmi Fuchiwaki, Hisayuki Aoyama:
  Compact USB Camera-Based Navigation Device with Repetitive Compensation of Input Signals for Omnidirectional Inchworm Robot. Int. J. Autom. Technol. 5(6): 883-890 (2011)
• 
  Hiroyuki Fujimoto, Atsushi Waseda, Xiao-Wei Zhang:
  Profile Measurement of Polished Surface with Respect to a Lattice Plane of a Silicon Crystal Using a Self-Referenced Lattice Comparator. Int. J. Autom. Technol. 5(2): 179-184 (2011)
• 
  Mikio Fujio:
  Development of a High-Speed and High-Accuracy Machining System Based on Servo-Data Control - Evaluation of Prototype System -. Int. J. Autom. Technol. 5(6): 855-861 (2011)
• 
  Toshinori Fujita, Kazutoshi Sakai, Yusuke Takagi, Kenji Kawashima, Toshiharu Kagawa:
  Ultra Precise Positioning of a Stage Driven by Pneumatic Bellows. Int. J. Autom. Technol. 5(4): 508-515 (2011)
• 
  Shigeo Fukada, Kentaro Nishimura, Tomoaki Matsuda:
  Modelling and Control of Flexure Mechanism Driven by Electromagnetic Linear Motors for Ultraprecise Continuous Path Positioning over a One-Millimetre Stroke. Int. J. Autom. Technol. 5(6): 809-822 (2011)
• 
  Katsushi Furutani, Taizo Makino:
  Prototype of Manipulator for Micro Objects Employing AZARASHI (Seal) Mechanism as Mobile Platforms. Int. J. Autom. Technol. 5(6): 823-831 (2011)
• 
  Mayank Garg, Amit Agrawal, Ramesh Kumar Singh, Suhas S. Joshi:
  Microscopic Textured Surfaces for Micro-Fluidic Applications. Int. J. Autom. Technol. 5(1): 30-37 (2011)
• 
  Hiroyuki Hamana, Mitsushi Tominaga, Miyu Ozaki, Ryoshu Furutani:
  Calibration of Articulated Arm Coordinate Measuring Machine Considering Measuring Posture. Int. J. Autom. Technol. 5(2): 109-114 (2011)
• 
  Ryohei Hanayama, Katsuhiro Ishii:
  Surface Shape Measurement for Small Lens Using Phase Shift Shearing Interferometer. Int. J. Autom. Technol. 5(2): 162-166 (2011)
• 
  Takashi Harada, Ke Dong:
  Mechanical Design and Control of 3-DOF Active Scanning Probe Using Parallel Link Mechanism. Int. J. Autom. Technol. 5(2): 86-90 (2011)
• 
  Sadaji Hayama:
  Factory Tour of the Ashikaga Plant of Hamai Co., Ltd. Int. J. Autom. Technol. 5(5): 747-751 (2011)
• 
  Nobuhiko Henmi, Yuta Sumi:
  Clearance Adjustable Impact Damper for Flexure Mechanism. Int. J. Autom. Technol. 5(6): 842-846 (2011)

skipping 98 more matches